At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sony is notorious for brand specific the same can be said for their mavica series cameras that can use any mini-disc. unfortunately the best solution is to stay with sony tapes
No. The timing cam is misaligned. The carriage is suppose to accept the tape, and when you close the door, it pulls the tape from the carriage towards the head and drive the take-up reel to the supply reel as the head reads or plays back the tape. If the timing cam is misaligned, it will not accept the tape and thus you get the error message.
Main code 95 : Digital signal process system error and communication error with ICs 7 : STANDBY-OFF mode 4 : Capstan motor/FG 4 : FG cannot be detected.
On Sony DSR-80P error 02-221 and 02-291 is a problem with the tape
pull-in or eject. Mostly the tape stickers are bad situated over the
stripe-cover at the top, which should be moving freely!
Remove the stickers from the tape or put them lower on the case. If the
tape is already inside the machine is unable to reject the tape -
disconnect the machine from electricity to open it or call service...
Are there any indications on the front panel at all? There should be an error code of some sort there. If not, I'll need to research this a bit. Please update this with any codes.
Hello dear sir;
I have SONY handy cam(model 42E) that finger touch keys doesn’t work .what do I do now.
Please help me and send a procedure to repairing.
I am Iranian mechanical engineer.
×