At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Contact the authorized service center for NEC. If you know the part number to it (refer its repair manual), you can buy it online from www.alibaba.com/ Electro help
hi John, here in New Zealand we can buy repair threads for this type of problem. You should find them in your local auto parts store. Failing that a good engineer should be able to run one up on a lathe in no time at all. happy new year
No, you don't need a new tank. You are right about the filter inside the tank.It will make it very easy for you if you can buy the new lines with a new filter attached, but if not, just buy the fuel line.
Mine did the same thing - unfortunately, that means it's dirty. When they recommend a good cleaning of the filters every 3 mths - they mean it. The filters may not look dirty, but if you skip cleaning them (like I did) - those tiny little particles build up & then clog the filter. The bottom filter is not cheap - you can pick it up online for about $55, considering the alternative (running the Dyson w/o the bottom filter - and yes it will run without it) which may result in damaging that very expensive motor - go buy a new filter. It's cheaper than buying a new Dyson or replacing a burned up motor.
could be a split in the o ring on the filter just buy new filter they are cheap, take old oil rub new ring down and put new filter on hand tight nothing more.
You can buy a new oil filter and fuel filter at the briggs & stratton website here are the exact links
oil filter http://www.briggsandstratton.com/engines/shop/parts-and-accessories/part.aspx?id={803C6266-A7A3-4F83-A56E-8148DE31F0F6}&cs=Intek%E2%84%A2+with+XRD+Series+(V-Twin)
fuel filter http://www.briggsandstratton.com/engines/shop/parts-and-accessories/part.aspx?id={7135A082-B7B4-4F72-B4AF-29FBEBB661C5}&cs=Intek%E2%84%A2+with+XRD+Series+(V-Twin)
Regards
obliqueridge
I believe that the owners manual has a parts listing to help you distinguish the part that you will need to buy. However, if your pool filter was purchased in 1990, you are probably going to need a new filter. Most do not last over 20 years.
clean it - pull out the bucket, look under the front panel lower lip, remove any tape, and pull down the slide-in filter (it fits behind front grill) - just vaccuum and/or rinse and put back in - the tape was just for shipping.
You can buy a canister wrench at the local auto parts store. You do not need to torque the oil filter on, just hand tighten, No new gasket for the drain plugs just do make sure that it is tightened properly
×