Haywood Max-Flo Pump (self priming)for indoor inground pool 3/4 HP ... model C48J2N131A -- yesterday turned off master breaker switch to everything in the pool area (including power to pump) so that I could open the container that holds the chlorine pucks ... once I had performed this task and closed up the container again, I turned the master breaker back on and everything started up again. I then checked individual breakers (there is a problem with a ventilation fan in the pool area not working) to see if one had been tripped off. the first breaker I turned off happened to be the one that powered the pool pump ... when I turned it back on the pump would only hum for about 15 - 20 secs and then I heard it click off. the pump was very hot. I let it cool down completely ... it has been off now for 24 hrs. but when I turn the breaker on again, the pump just hums/drones for about 15 - 20 secs and then stops making any noise. what is the problem? is there a reset button?