Question about Hardware & Accessories

Open Question

Setting date and time on a Hitachi RAR-3U3 split system controller

I replaced the batteries. I pushed the reset button. I get a flashing Time button, but when I press it nothing happens. If I then go on to press the Timer Control button all that happens is that the temp of +/-1 or +/-2 shows (ie. like you are changing temps on the Auto setting).

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 75 Answers

SOURCE: Camera looses date & time setting

There is a cmos battery (or a memory battery) on the main circuit that like any battery wears out eventually. If you are familiar with repairing electronic circuits you can get the part from Olympus. There is no part number just "memory battery for C-740" will suffice. Your other two choices are to take the camera to a shop where they can do the kob for you. Don't let them sell you a complete new board, you don't need one. Not for this problem anyway. Or you can ignore the problem and reset the camera (or not)each time you change batteries.

Posted on Mar 31, 2007

Ad
catriver

Ron Marek

  • 878 Answers

SOURCE: Digital Control (for oven temp and clock adjustment) not working

Puzzeled, usually when there is a stuck or shorted keypad there will be an error code. First let's see if we can tell if we are in Centigrade or Ferenhiet. Press the bake and broil button together for 2 or 3 seconds. SF should appear in the display. Press the broil pad again and C or F will be displayed. Toggle to F and press start. See if that was the problem. If not try to increase the speed of the + and - keypads. Press bake and broil together for 2 seconds until SF displays. Press the + keypad increase the speed of the control. It should toggle from 1 to 5, 5 being the fastest. Press start and see if that works. If niether works..then have someone remove the keypad ribbon cable from the control board and clean the ends with an eraser. See if that solves the issue...Catriver..post back and let me know.

Posted on May 12, 2007

Anonymous

  • 6 Answers

SOURCE: setting time/date on old Seiko

Good News you can find Seiko Digital Watches Instruction manuals from http://SeikoDigitalWatches.com its very good site about Seiko Watches.

Thanks
Kashif
http://VintageDigitalWatches.com

Posted on Apr 02, 2009

57 varieties

Karl Wright

  • 1653 Answers

SOURCE: Control Locked

Locking controls
The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled. You can lock the washer while it is
operating.

To lock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds.
The CONTROL LOCKED status light glows.

To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off.

Posted on Oct 23, 2009

Ian  Hot Tub

Ian Kime

  • 77 Answers

SOURCE: When I change the temp. setting it keeps heating at original temp

The keypad appears to working correctly.

When you alter the set temperature via the keypad the display will flash the temperature thats to be acheived, once it stops flashing the keypad will revert back to the current temperature of the water.

Hope that helps,
Ian.
http://hottub.synthasite.com

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung LN40c530F1F and I accidentally pressed the button below the power button labeled "DVD receiver/TV" and now nothing works at all on the remote. I have tried re-pressing the...


Take the battery out like about hour for a hard resetting.After putting the battery back in u should push the button that said TV only.The remote should be functions again for the tv again.

Jun 18, 2011 | Samsung LN40C530 TV

1 Answer

Nikon D70 is freezing up. I have no idea what I may have done but when I push the button to take a picture nothing happens and r09 flashes


r09 is just the camera estimate od how many shots you have left on your memory card. For the other, Use fully charged battery , Turm ca,era on and re,ove battery while at same time holding shutter for a[[rox 3- seconds. Re[lace battery, then turn camera off.on. If that does not do it, turn camera on and press reset button on bottom of camera (page 200, I believe, in tghe users manual

Jan 29, 2011 | Nikon D70 Digital Camera

1 Answer

Ive just moved into a flat with a servis 7kg 1500AA washing machine and i have no instructions for it. when i press the on button the yellow light above another symbol flashes and nothing happens. ive...


Hi. Set the dial to reset (12 o-clock position) then push button second from right. Now set to program required and press button again. Should work now. Needs resetting every time, this is normal. Hope it works for you.

Sep 10, 2010 | Washing Machines

1 Answer

No setting instructions.


Atomic clocks are the wave of the future because of their precision. While it takes a scientist to fully understand how these clocks actually work, the general public is primarily interested in their accuracy, rather than their construction. A major benefit to atomic clocks is that they serve as the main standard for calculating time internationally. While each version of atomic clock may have minor differences, for the most part, they are set in the same way.

1. Remove the battery cover on the back of the clock using the correct screwdriver (if one is required). Be careful not to break the cover or lose any screws in the process. Insert the required number and type of batteries into the clock. Most atomic clocks take two AA batteries. Make sure the batteries are positioned with the right polarity in place, and that the clock is functioning, before replacing the battery cover. Place the cover back into its original position and screw any necessary pieces back into place to secure the cover and protect the batteries from springing free.

2. Enter the program mode of the clock by holding down the appropriate button. In most cases, the button will be clearly marked "Set." If not, refer to the clock's instructions to find out which button fulfills that function.

3. Push the button down until the clock flashes its default time zone setting of --5EST. It is now ready to program each function separately as described in the steps below. If for some reason the clock does not respond as outlined, refer to the instructions provided with it for troubleshooting guidance.

4. Press the + button to select the right time zone from the 13 international options provided. The default setting of --5EST (Eastern Time), should appear first, followed by --6 CST (Central Time), -7MST (Mountain Time), -8PST (Pacific Time), -9ALA (Alaskan Time), -10HAW (Hawaiian Time), -11, -12, GMT (Greenwich Mean Time), -1, -2, -3 and --4ATL (Atlantic Time). Then push the "Set" button down again to confirm the time-zone setting you have chosen. Push down the "Set" button again and hold until the selected time zone flashes.

5. Press the "Set" button down two more times to establish the default language setting. Press the + button down to select English, French or Spanish. Then push the "Set" button down again to confirm the language setting.

6. Push down the "Set" button again and hold it until the time zone flashes. Then press the button down three more times until the time 12:00 flashes. Press the + button down to select the hour at the time of the clock's setting. Make sure the hour is set appropriately to AM or PM. Then push the "Set" button down once more to confirm the hour setting.

7. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button four more times until 00 flashes. Press the + button down again to select the minutes at the moment of setting. Push the "Set" button once more to confirm the minute setting.

8. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button five more times until the default year flashes. Press the + button down. Toggle through the settings until the appropriate year is reached. Then press the "Set" button down to confirm the year.

9. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button six more times until the default month of January is reached. Toggle through until you reach the right month. Then press the "Set" button down to confirm the month.

10. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button seven more times until the default date of 1 is reached. Toggle through until you reach the right date. Then press the "Set" button down to confirm the date.

11. Push the "Set" button again and hold until the time zone flashes. Then press the "Set" button eight more times until the default setting of Sunday is found. Toggle through until you reach the right weekday. Then press the "Set" button down to confirm the weekday.

Hope this helps......best wishes.

Aug 28, 2009 | GPS

1 Answer

NO POWER!!!!!!


You can try doing a factory reset, but you will everything.


Press and hold the two soft keys while you press the reset button.

Press R to reset, Q to cancel.

Aug 17, 2009 | HTC PPC-6800 Smartphone

3 Answers

Wii fit board wont sync


Ok I feel a little silly, there is a sync button on the console (inside the flap by the power on button) and the board (inside the battery compartment on the underside of the board) as soon as I pressed them at the same time it worked. Goodluck everyone.

Dec 29, 2008 | Nintendo Wii Console

2 Answers

Accuwave DS Clock


The radio may not be able to get a strong enough or clear enough signal to process (night is best away from TV, computers and radios).  To regain "control" of the clock, take the battery out, wait 30 seconds and then reinstall it.  This will reset the clock.  You can then manually set the clock. 
Press SET for a few seconds until the hour starts flashing in the display.  Then press the ADJUST button to set the hour.  Press SET to move to the different functions (Hour -> Minutes -> Seconds-> Month -> Date -> Year) each time using the ADJUST button to correct the setting.  Finally press MODE to exit the setting mode.  
If the time zone is incorrect for your area (default is PST), press MODE to enter the Alarm Time Mode; then press SET to flip through the time zones; then press MODE again to exit.
The little "reset" is for use if the LCD display doesn't come on when the battery is changed. It doesn't affect any of the clock settings per se.

Nov 02, 2008 | Audio Players & Recorders

1 Answer

Presario v2000 stuck in hibernation, can't power it up


remove battery plug in power...see what happens ...nothing happens press and hold power button until you hear response(shut down)press power as usual to boot.if it doesnt work first time try a few times more remember to keep power button pressed to shut down.

Oct 19, 2008 | Compaq Presario R3000 Notebook

2 Answers

Keyboard not responding


Solution. My wireles keyboard stopped working except for the F-Lock key, the Media key and the sleep key. It wasn't batteries, even though I tried, communication was there because the above keys were working. Remove the batteries from your keyboard and let it sit for about 10 minutes. Press the red connect button a few times and other various keys every few minutes during that time. This may be the whole "capacitor discharge" trick, but I tired that with someone elses instructions and my keyboard did not work after 2 minutes of key pressing. I think it just needed more time to clear out the secure settings. Good luck, I was about to trash this keyboard until I tried again

Nov 26, 2007 | Elite Logitech Media Keyboard(KB9675590403

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5391 Answers

Brad Brown

Level 3 Expert

18157 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...