Setting clock on pioneer radio

Here's a link to the manual at Pioneer's web site.

Here's how you set the time (from page 16 in the manual):

1: press SOURCE and hold until the unit turns off.
2: Press AUDIO repeatedly until the clock appears in the display
3: Press (left arrow) or (right arrow) to select the segment of the clock display you wish to set (hours, minutes)
4: Press (up arrow) or (down arrow) to set the clock.

- To cancel clock settings, press BAND
- to save clock settings press AUDIO until the display stops blinking


If this helps, please hit the "thumbs up" for me!

The solution is very simple which I too struggled initially. First **** the CD if any in the system. Then press SRC button in lower left button till it displays clock by pressing it for 2-3 secon ds or 2-3 times as using it you change it to CD and Radio. When clock is displayed press Audio button on top right for 2-3 seconds and then hour will blink. Use Up/Down arrow as por your need to set hour. Else use right arrow to shift to seconds and as it blinks use UP/DOWN arrow to change. After you are set press SRC button again and U R DONE!!!!

With power OFF, press and hold the FUNC (or CLK) button until the date and time are displayed. Use the up/down/left/right control to set numbers and change positions....when happy with date and time turn unit ON..should be good to go.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_aad3edb7dfa380b9

ok what u do is turn radio off hit clock so that it displays the time then hold audio button in until clock starts flashing then use your arrow ****. not your vol. ****.

Press source and hold until unit turns off
Press function until clock appears in display
That is short version you to get you there.
Here is a manual for you, the clock setting is on p34

http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/187294998DEH-P3700MPOperationManual.pdf

Switch off the radio. Now press clock so that the time is displayed. By trial and error look for the buttons that will increase or decrease the hour reading. Do the same for the minutes. The time will now be set. Actually, very easy, come to think of it.

The solution that worked for me is:

1) turn off the radio.
2) Push and hold the power button down (the dial). DON'T release the button.
3) The unit will display the time on the lcd screen with the numbers flashing, (only hr or min).
4) use the up/dwn, right/left buttons to set the clock.
5) turn off the unit by pushing the power button (again, the dial).

That is it. the clock should be set.

Hope that helps,

Here's a link to the manual Pioneer's web site.

Here's how you set the time (from page 16 in the manual):

1: press SOURCE and hold until the unit turns off.
2: Press AUDIO repeatedly until the clock appears in the display
3: Press (left arrow) or (right arrow) to select the segment of the clock display you wish to set (hours, minutes)
4: Press (up arrow) or (down arrow) to set the clock.

- To cancel clock settings, press BAND
- to save clock settings press AUDIO until the display stops blinking

Turn the raido/cd player off. Hit the clock button. Time will display. Press and hold down the audio button for 4 seconds. Use the arrow keys to change time. Press and hold the audio key when finished until the time is done flashing.

How to change the time on a Pioneer DEH 1500 car stereo:
With the radio off, select the 'clock' (upper left button) to display the time.
Press and hold the 'audio' (upper right button) until the time display blinks.
Use the 'select' buttons to select the hour or minutes and adjust time (right button selects minute digits, left button selects hour digit, up button increases the time, bottom button decreases time). Comment by dognut, posted on Dec 25, 2007 Just a further comment posted by dognut:
After setting the desired time, 'press any