Emachine w3052 will not connect through ethernet

F9 or F12 leads you too a system recovery to reformat the pc or you can download hirens boot cd off google that fixes NTLRD errors

If your particular eMachines model didn't come with recovery media or you just misplaced the disc, you don't want to be caught without a means to restore the operating system.

It's all too easy to accidentally download a virus or experience any number of problems that make your computer unstable.

However, there is an option for restoring your computer without the original recovery disc by using the pre-installed recovery software.

Use an external memory device such as a DVD, flash drive or external hard drive to back up the data you need to save from your eMachines computer.

Any data that isn't saved to an external source will be erased when the computer is restored to factory settings.

Remove any discs that are in the optical drive and unplug the computer's peripheral devices, such as an Ethernet cable or scanner.

Do not disconnect the keyboard, mouse or monitor.

Click the Windows "Start" menu and choose "All Programs."

Navigate to "eMachines" and choose "eMachines Recovery Management." Click the "Restore" tab.

Click "Password Settings" if you have not already set a recovery password. Type a new password in the text box and click "OK." Click "Restore System to Factory Default."

Type the recovery password and click "OK." Click "Next" to wipe the eMachines computer's hard drive and begin the recovery process.

Select "Finish" and wait for the eMachines computer to restart.

Use the series of installation prompts that appear on the screen to create a new user account for your operating system, set the system date and time, and set up your internet settings.

hope this helps

Follow this link and download the "Other Drivers for Motherboard Package"

The Ethernet Driver should be on there.


http://support.gateway.com/us/en/emac/product/default.aspx?tab=1&modelId=1440

Not sure that this is what you need, but should work. If you have Windows OS, try pressing F8 when booting. A menu will be given on the screen. Will have to choose SAFE MODE and when windows loads go to START MENU-PROGRAMS-ACCESSORIES-SYSTEM TOOLS and choose SYSTEM RESTORE

the following links will help you, same as 3052

http://downloads.emachines.com/drivers/bios/D00221-001-002_readme_em_us.txt

http://emachine.com/support/drivers.html

http://global-download.acer.com/GDFiles/Driver/Others/Others_eMachines_4.46_XPx86_A.zip?acerid=633937006283283102&Step1=Desktop&Step2=W%20Series&Step3=W3052&OS=X01&LC=en&BC=eMachines&SC=PA_6E

Telephone eMachines, and order a replacement "System Recovery" set of CDs. Given the serial-number and model-number of your computer, they know what O.S. originally was factory-shipped with your computer, and they will replace that part.
Probably, a small fee for courier-shipping.

Visit the support section of the eMachine website to get the software that controls that function.

What Operating system are you installing or using on this computer?

The XP Chipset drivers for this motherboard should fix your problem. The download can be found here.

ok my friend

there you go this is the website just download it from any other computer and run it in you emachine computer

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T3418


cheers

The board should have markings indicating where to put the wire. It will probably be abbreviated such as "PW" or something similar.

eMachine Support