Caller id is not displayed anymore

http://bt.custhelp.com/app/answers/detail/a_id/8502/~/all-about-caller-display

It is my understanding the caller ID feature comes as part of your telephone service and your phone only displays what comes through. So either you changed the subscription which means you dropped the Caller ID feature or your BT plan does not have it anymore. Best to call BT and confirm.

The caller Id service is a paid extra. If you have a caller ID phone, and are not a subscriber to the service it will not do you any good.

Due to the age of the SoundPoint Pro, it some of its features are not compatible with newer phonesystems, such as CableVision. There are no software updates for the SoundPoint Pro, and as long as the Caller ID is enabled there are no other settings or adjustments that can be made to workaround these kind of problems unfortunately. I recommend contacting your service provider to see what kind of caller ID signaling they are using; most likely they will be using a newer digital system, or MDMF which is not backwards compatible with SDMF or earlier CID receivers.

You dont normally have to "turn on" caller ID on a phone capable of displaying caller ID.
However, the caller ID data the phone has to pick up off the phone line when a call comes in is normally an additional (paid for) service from your telecomms provider.
Have you specifficlally requested the caller ID service from your telecomms provider ? If so, have they confirmed it is now up and running ? Are you sure your phone is caller ID compatible ? Can you borrow a phone from somebody, that you know dsiplays caller ID and try that phone on your line ?
If the answers to these questions is yes, then you need to report this as a fault to your telecoms provider who, so long as the answers to the above questions really is yes, wont charge you for rectifying the problem.

what happens wen my globe does not light anymore ?

READ THE MANUAL. It will tell you have to activate caller ID.

display ic got short internally that has to be replaced.this many a times happens due to over charging or the moisture collected on the circuit makes it short when connected for charging.

All Panasonic display phones, both analog and digital 7xxx series phones support CID. It requires 5 or 6 program adjustments as outlined in the manual. With luck, you may be able to just turn it on in 406, but your area code needs to be set if you have 7 digit local dialing, you need to tell the system if you want CID to adjust the clock daily, SMDR display, etc.

The 1232_PG lists all the steps. If you don't have a manual, you really need to get one. Post back and we'll see what we can do.

Carl

i dont know what is the answer....im so sorry for that...i have question...who post this question?