Guitar Link Vista 64 BIT Drivers, there are none!

If you get beyond the 32/64 issue, check the audio setup for your audio device in your windows control panel. If your USB interface both recieves from your guitar and sends audio to your external amp, make sure BOTH the input and output to the USB are listed as the in and out in the "VOICE" tab when you go to the control panel and "Sounds and Audio device properties".:

Hello ognetpc, did you install 32-bit or 64-bit video drivers ? Example if you have windows 7 64-bit you must install 64-bit video driver, because nvidia 32-bit video driver will not work properly. I found latest drivers for you video card. Click save driver to your computer, install the driver, don't forget to restart the computer. Here is the link.

Copy and paste link into your browser and press enter.




For Windows 7, Vista 32-bit
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/260.99/260.99_desktop_win7_winvista_32bit_english_whql.exe&lang=us&type=GeForce




For Windows 7, Vista 64-bit
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/260.99/260.99_desktop_win7_winvista_64bit_english_whql.exe&lang=us&type=GeForce


Good Luck!

hello
how to install modem D link DU-562m on windows 7 64 bit

Here is a link to Lexmark drivers for your X1270 printer....are you running 32 bit or 64 bit Vista? None of the drivers actually say 'Home Edition' or 'Business Edition' or 'Ultimate Edition'. Vista drivers are not dependent, persay, upon home, business, or ultimate But Are dependent upon 32 bit OR 64 bit. Both 32 bit and 64 bit drivers can be found here. Hope this helps.
http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_US&question=x1270+drivers&productCode=LEXMARK_X1270&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X1270&searchid=1255871610438#1

Here is the link to their support page, but they do not list 64bit versions for Vista, just the 32bit. Try contacting them to see if they are going to issue one.
http://www.behringer.com/EN/Products/UCG102.aspx

Are you on Vista or Vista 64. If you have moved to the 64 bit platform you'll need 64 bit drivers. Otherwise check out the D-Link site for the latest drivers for you camera and try them ...

Cheers,
Ripface.

You can use ASIO4All driver to solve this problem instead of using the behringer driver. http://www.asio4all.com/

what you need to do is install the asio4all driver then select file, adio midi settings and where it says behringer audio codec click the arrow and select asio4all then click the configure button and in the wdm list you must activate all the items under audio codec and the audio speaker under High Definition audio device this will allow it to work through the speakers, or just leave it how it is and plug in a set of headphones. make note though that your speakers will play nothing else but the guitar sound. all other music internet sounds, the lot will no longer work as your ucg102 is high jacking your sound card to produce the sound from your guitar. hope this helps.

Did you install the Vista Behringer BCD3000 driver?

see this link

http://www.behringerdownload.de/B-Control_download/BCD3000-Vista-XP-1.2.0.0.zip

Note!

You didn't mention your Vista version. Like 32-bit of 64-bit.
This driver is for the 32-bit! 64-bit is not listed(yet).

See the manufactors web site below. Their are no VISA drivers available for your modem. I am sorry to say that your only opting may be a different (VISTA) compatable modem.



http://www.dlink.com.au/tech/