Konica bizhub di1610fp priter constantly gives a paper size error and requires paper reset.

If your Konica Minolta bizhub 162 is displaying a paper size error, you may be able to resolve the issue by resetting the paper size settings on the printer. To do this, follow these steps:

1. Press the "Utility/Counter" button on the printer's control panel.
2. Select "System Settings" from the menu that appears.
3. Scroll down to "Paper Settings" and select it.
4. Scroll down to "Paper Size" and select it.
5. Select the paper size you want to use and press "OK."
6. Press the "Stop" button to exit the menu and save your changes.

If you continue to experience the same error after resetting the paper size settings, there may be a more serious issue with the printer that will require professional service to resolve. I recommend contacting Konica Minolta or a qualified printer technician for further assistance.

a4 paper size is the same as 8 1/2 x 11

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

flip out the bypass tray

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Select by pass,select envelope or paper type,select paper size or custom size.

make sure the paper in the trays are the same size as what your sending

Paper size error what is the weight of the paper and size???

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Paper Lift failure of the finisher output tray. Did some one hit the finisher tray or did it hit something underneath? May require resetting the position of the finisher output tray, get qualified tech to do it !!!!.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The maximum paper size for the Bizhub 180 was 11"X17". Using a larger paper size will result in either incomplete copy or a paper jam every time.
Good Luck and Thank You for using Fixya.

First of all check the error.what error is appearing on the display.if it is about the paper size error then check the paper size in the tray. then adjust the paper size from your computer where you installed the driver, adjust the paper size from printing preferences by right clicking on the printer icon.then in paper size tab you can adjust the paper size. paper size must be the same as in the tray.

C0500 code that is fuser.try reset this one first by powering machine on while holding down STOP BOTTON ON THE OP PANEL
hope that help