Hi, My Zanussi ZDT5052 stops after draining water and last program(50-degree quick wash) light starts to flash quickly. It happens sometimes with first water drain, sometimes after last drain. Some cycles are washed normally, but then again, for an example after draining water with washing powder it stops and starts flashing this light. Filters are checked. Same with hoses. No lime. What it could be? Manual doesn't say anything about last light flashing.
Thank You!
T.Raasuke
I had the same problem. After cleaning hose between unit which measures water level (located below, near right leg) and sink everithing works fine.
Tarvi...I don't know what the problem is...hard to diagnose these things. If the unit is working correctly, I suggest that you simply cut the power for a few minutes and then restart it. That may clear our a trouble code.
859 views
Usually answered in minutes!
I now have the same problem. Things started after having twice the electricity cirquit breaker going off during washing cycles. I figured out that there was no water in, so the heating resistors were heated and caused the cirquit braker to disengage power. Then I changed the water hose and cleaned the filters, so water input was OK but I have the quickwash flashing problem and my wife is complaining dishes are not cleaned well. For the moment she repeats twice the washing cycle.
×