Bearcat BC144XL Scanner ~ no sound

Uniden BearCat BC 855XLT Operating Manual Page 9

The best programming instructions for your scanner are in the manual that you can download and print, at no cost, here:

http://www.box.net/shared/it6eozctkb

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

www.RadioReference.com

Bill B.
Listening in since the 60's

Try manually unlocking each channel by selecting it and then pressing the LOCKOUT key. That will normally clear the channel for programming. If that doesn't fix the problem, power the scanner OFF, then press and hold the MANUAL, 2, and 9 keys while powering the unit ON. That should restore the scanner to its original factory settings.

Need the manual for your scanner? You can download and print it, at no cost, here:

http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC148XLT%20%28Manual%29.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

www.RadioReference.com

Bill B

You didn't mention what frequencies you're trying to program. BC148XLT coverage ends at 512 MHz, so you will get the error message if you try to program anything above that. Also, you must be sure to include the decimal point when programming a frequency into the scanner. I hope this helps.

Need the manual for your scanner? You can download/print it here:

http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC148XLT%20%28Manual%29.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

Hi,

You can download the complete instruction manual in PDF format by clicking this link.

On the page which opens, click on the "Download" button to download and save the manual.

• You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

I can't find the manual for that model, but here's how to program it:

- Power the unit ON
- Press MANUAL to stop scanning
- Enter the channel number that you wish to program (01-16)
- Press MANUAL
- Enter the frequency to be programmed, including the decimal (example 156.25)
- Press E (Enter) to confirm
- Press MANUAL to advance to the next channel

For a comprehensive database of active frequencies in your area visit

www.RadioReferencve.com

hello there: here is a link for you that will help out ok
best regards mike

How to Program a Uniden Bearcat Scanner BC 140 | eHow.com How to Program a Uniden Bearcat Scanner BC 140. Programming a Uniden Bearcat ... How to Program a Bearcat 5 Scanner. How to Program a BC 560XLT Scanner ...
www.ehow.com/how_5009391_program-uniden-bearcat-scanner-bc.html - 57k -

I can't locate information specific to the 210XW, but hopefully this generic Bearcat programming info will help:

1. Press the MANUAL key to advance to the channel that you wish to reprogram.

2. Enter the new frequency, including decimal point.

3. Press the ENTER or E key.

4. Start over with step one to continue programming channels.

You can get scanner freqs. for your area here:
http://www.cityfreq.com/

As far as programing them in you need to refer to your users manual. If you have lost the manial you should be able to dload it here:

http://www.uniden.com/index/manuals_results.cfm?cat=3

Good luck
Sean

What make of scanner ??? if its a uniden bearcat try there web site they have user manuals there for download
www.uniden.com