What is procedure to remove top on fisher and paykel washsmart Model WA 1068G1 top loader

Question edited for clarity, turn question around, add CAPS.

It is a motor stall. You need a technician.

Washing Machine - Top Loader Fault Code Numbers

Fisher & Paykel https://support.fisherpaykel.com > article > Washing-M... Sep 30, 2023 - 136, Motor Error - You will need a Service Technician to assist with this - Click Here to ... © Fisher & Paykel Appliances Ltd 2023. Loading.

Questions & Answers for: fisher paykel fault code 136

Fixya https://www.fixya.com > ... > fisher paykel fault code 136 Now Error code 136 means you have a motor stall ... Question about GWL11 Top Load Washer. 1 Answer · What is fault code 136 on fisher & paykel ...

I have a fisher paykel GWL11 that will fill and drain but

JustAnswer https://www.justanswer.com > Appliance Repair May 25, 2017 - If you had a 130 and a 136, the sensor is not likely the issue. Will the tub turn manually? How about lift up and down? Ask Your Own Appliance ...

1 answer · Top answer: Oh, that plastic nut will come off. See the link below. CLICK HERE

https://www.google.com/search?q=Fisher+%26+Paykel+GWL11+top+loader.+Fault+code+136

..

Question edited for clarity.

Videos that may help, but you probably need a service call.

https://www.google.com/search?q=Fisher+%26+Paykel+Wash+Smart+switches+on+then+off

..

Question edited to correct name of maker, (Fisher PayPal :>)
Question moved to one of their categories.

No clue to whether a top loader or a front loader, which is why we ask for full 'make model (what it is)'.

If it is only in the rinse cycle, and if it is a front loader it is likely to be spray of a crack in the box that is the detergent drawer and fabric softener mixer. The only way to find out is to remove the top after a wash and look for where the water came from.

Some other ideas here

https://www.google.com/search?q=Fisher+and+Paykel+washer+is+leaking+water+from+bottom+back+right+side

..

Contact Manufacturer:

https://producthelp.fisherpaykel.com/au/Wash/Top_Loaders/WashSmart/WA1068G1/User_Guide_WA1068G1/22_Customer_Care




https://producthelp.fisherpaykel.com/Special:Search?qid=&fpid=230&fpth=&path=%2Fau%2FWash%2FTop_Loaders%2FWashSmart%2FWA1068G1&search=Service+manual+


https://producthelp.fisherpaykel.com/Special:Search?qid=&fpid=230&fpth=&path=%2Fau%2FWash%2FTop_Loaders%2FWashSmart%2FWA1068G1&search=Service+manual+

top loader
indicates that the tub support rod air dampeners have failed and you need a set of new rods

Pump Impeller is jammed cannot turn
has over-current power supply.
Small black chip near the small transformer has blown.

Check the fitting on the machine where the hose goes on there is a mesh filter there ,a hornet or other insect may have blocked it.

top loader yes remove cap off top of agitator there is a plastic wing nut at the bottom undo anticlockwise and agitator canbe removed and replacement

Hi just read your posting.Have you selected cold only?Are the hoses from the taps going to the correct water valve?Cold tap to c on the machine and hot tap to h on the machine.What is the model number of the machine?The model number sticker is on the back of the machine up top.Please reply with additional information and I am sure I can help rectify the fault.Looking forward to your reply/

why life so unfair ?