Are you trying to format the card in the camera? That's the accepted way. Go into the setup menu and find an entry for "reset"...try that. Try removing the card and battery...press all the buttons...insert the card and then the battery..try it. Remove the card and erase the pictures the camera says are in the internal memory.
Testimonial: "Thanks for your help, much appreciated."
First, let's transfer the internal memory to your card. Insert the card into the camera. In the setup menu, select "copy". Select the setting for transfer of "in" memory to memory card. Press menu/ok to confirm.
Next, remove your card. We're going to format the internal memory. In the setup menu, go to "format" and follow the on screen instructions. Finally press menu/ok (takes about 15 seconds). Now, with no card in the camera, the camera icon with the "in" is in the lower corner. When you insert your card, that should disappear. Let me know how it turned out.
Did you at least try to format the internal memory?
At this point, you should e-mail a tech person from the support section of the Fuji website and explain your problem. They may have a download or a work-around.
×
214 views
Usually answered in minutes!
Thanks, I tried what you suggested but it still won't work. I erased the pictures, pressed the reset button and then switched the camera off, removed the batteries and the memory card like you said. I did notice, however, that when I switched the camera back on I got the message "images saved to Internal Memory" and there is a small camera logo at the bottom of the screen with the "in" inside. I can't figure out any way to change this setting from internal memory to memory card???????
Thanks, I tried that but when I select "copy" its says "no card", although the card is in the camera. I tried a different memory card but that does the same.
Yes I did format the memory from the camera menu, but still no luck!!
×