Evenflo aura travel system

I hope this information helps:

1) There are harness anchors (metal clips) located on the bottom of the seat. Push these up through the slot to the front of the seat on both sides. To do this, you will need to pull them toward you, and then turn the anchors to fit through the slots.

2) You should be able to remove the bottoms of the straps at this point. Remove them, then pull the tops of the straps through the slots. (You will need to remove the buckles during this process.)

3) Slide the straps through the slot you need for the correct harness height.

4) Replace the buckles in the correct positions.

5) Replace the bottoms of the straps into the harness anchors.

6) Push the harness anchors through the padding and back into the bottom of the seat. Clip into place.