Electricity went off. Now maching is flashing CL

To clear the alarm:
1) Press and release the "SET button four times. "cnd" will be displayed on the screen.
2) While "cnd" is displayed, press and hold the "SET" button. The display will show the number of weeks the refrigerator has been running.
3) While holding the "SET" button, press and release the ON/OFF button. The number shown on the display will reset to 0.
4) Release the "SET" key.

fixed. thanks

i want airtel mobile numbers pre and postpaid in hyderabad and secunderabad.

Set the clock on the handset

You can download the phone manual here:

http://www.home-electronics.net/ge/pc/IB/25942GE2_IB.pdf

It explains the time/date setting (done from the handset).

We had this same problem and seeing that the Manual is incorrect, I searched GE website manuals to find a different one that at least looked like the right model and found out how to clear the CL message code. This is just a time/day setting and it is to be done by the handset, not the base unit, With the handset, press the flash key, then press #8. You should now see the time flashing in the display. Adjust the time then press the pound key. Now the day is flashing in the display. adjust the day with the up arrow, then press the pound key to finish. Your base unit will announce the time and day is set and the CL is gone.... good luck

Flashing CL means that your clock is not set.

The CL flashing means the clock needs to be set.

im in the same spot... di anyone found this sol. ?

You need to set the clock with the buttons on the back.