Question about Uniden TRU9480 Cordless Telephone

2 Answers

How to REregister handsets

Hello,I need help reregistering our handset.My Uniden is TRU9480-3
It has been working fine with us until last night when two of the handsets aren't receiving any calls at all.Only one handset is working at this time and I had tried several times reregistering them but to no avail.Everytime I tried to reregister the other two handsets it always says out of range,when the fact is I am not even a feet away from the main base.
I have no idea on what else to do,please help!!!!

Posted by on

  • Anonymous Apr 29, 2008

    second hand set is not receiving calls or working at all.

  • jbauerlts Jan 19, 2009

    does anyone know how to clear the base completly. My handsets died and i cannot deregister the handsets themselves so I want to clear the base back to factory settings. Does anyone know how to do that.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Thank you, we had a 12 hour black out and my phones unregistered, ur right, I unplugged it all, plugged it back in, put it back in cradle and it registered auto....also the head set I have registered too whew...thought they had blown up x

Posted on Mar 16, 2015

Ad

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

You can unregister your phone without being in the cradle, but to re-register them, just put them back in the cradle.  After being unregistered, they will automatically re-register once they are put back in the cradle of the main base.  Try setting them back in the base cradle to re-register, and hopefully that will work for you.

Posted on Dec 25, 2007

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Handset on base not working


Just wondering if you have tried to use one of the other handsets from the base.

My friends phone has done this twice in the past couple months. For some reason it just stops working. What I did to solve the issue was to just unplug the base for a minute or two and then plug it back in.

That seems to solve his particular issue for a little while at least, but whatever the issue is it seems very intermittent.

Jan 20, 2014 | Uniden D16804 D1680-4 w/ Range Extender...

1 Answer

No dialtone on handsets, 3 beeps sound


Deregistered 4 handsets, on suggestion from FixYa, by pressing hangup & # sign.
Then reregistered to base.

May 08, 2009 | Uniden 5.8GHz Expandable Cordless Phone...

4 Answers

Cant register/install a new dect 6.0 uniden 2060 phone


I had a similar problem which I finally fixed. You did not say if any of your phones registered.
First try the following recommended by Uniden Support:
Your phone(s) should be fully charged before putting them on the main base.
Unplug the battery from the phone by removing the battery cover and removing the connector. Then, push the # and * key together and hold while you plug the battery back in (requires some dexterity). Continue to hold the two keys until you hear a confirmation tone. This will force the phone to reregister. Put the phone on the main base (if you are sure it has a fully charged battery) and see if it will reregister it to solve the problem.
That did not work for me. So, I followed the instructions to de-register the handset (even though it hadn't really registered). But, I also pretended like the Base was not available (because using the base in this step also failed).
1) Press and hold the hang up and # keys for at least 5 seconds.
2) Move the cursor to select Base Unavailable and then press Select.
3) Select the base you want to deregister from, press Select and then move the cursor to Yes and select.
This causes the phone to delete any of its base information.
At this point, again insure that your phone shows the battery is fully charged and if it is not, put it on the stand alone charger base (not the main base). With the battery fully charged, place it on the base and try registering again by placing it in the main base.
If neither of these approaches help, contact support at Uniden.com.
However, my problems were cleared when I cleared the handset with the second set of instructions.

Apr 25, 2009 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

DSS2455 cordless phone


You need to restart the phone, take out the battery and restart it.

Jun 28, 2008 | Uniden Cordless phone EXS9950

2 Answers

Deregister lost or broken phones


Some tricks from a helpful Uniden rep:

holding down end+# keys at the same time on the phone for about 10 secs (you will hear a beep) will deregister the handset. If you have a dead handset and want to deregister it from the base, you have to reset the base. unplug the phoneline and power. hold down the "delete message" key, plug power back in. about 10 secs later, you will hear a long beep (theres a short beep upon powerup as well). At this point all handsets are deregistred and you will have to reregister them with the end+# trick. this way when #1 handset is dead, you can make a working one #1 and get the broken one fixed emotion-1.gif

BTW, this is a woot warranty, not uniden warranty. however the uniden rep gave me the number to the people who refurb (rox0rz!) these. I'll post an update when I finally get ahold of them (and the number if its actually helpful)

Jun 20, 2008 | Uniden TRU8885 Cordless Phone

2 Answers

Resetting the Handset


YOU might need to deregister the hand set first by holding down the red end (hang up key) and keep it down while holding the # key. If deregister wont work use base unavailable and yes, you are sure twice.

List the handset numbers of those working handsets
Using a WORKING handset follow these directions
Resetting Handsets
If you want to register the handset to a different base or
replace a handset with another one, you must first clear the
registration information from the base and the handset.
1. Press and hold [ ] and [#] for
at least 5 seconds, until the
SYSTEM RESET menu
appears.
2. Select the DEREGISTER HS
submenu. WHICH HANDSET?
appears in the display.
3. Move the cursor to select the handset ID to be de-registered
from the list, and then press the OK soft key. DEREGISTER HS
appears. CHOSE A NUMBER THAT IS NOT ONE OF YOUR WORKING HANDSETS
4. Move the cursor to select YES, and then press the OK soft key.
When ARE YOU SURE? appears, select YES. You will hear a
confirmation tone.
PUT THE HANDSET IN THE BASE CHARGER AND IT SHOULD REGISTER

Hope This Helps - It worked for me

Dec 29, 2007 | Uniden TRU9488 Phone

2 Answers

Cordless GE phone issue. 25825GE3-A


1. press the "talk" button FIRST
2. then press "program" button and follow instructions on screen

only one phone said "needs registration" but had to register all 4 phones but this worked for me
hope this helps

Sep 11, 2007 | Uniden Cordless Phone

1 Answer

Uniden cordless phones


This sounds like the register-deregister problem elsewhere on this page. Try holding down the "end" and "#" buttons for about 6 seconds to deregister the phones and then reregister them. I had this problem too and it worked for me.

Jan 19, 2007 | Uniden TRU8885-2 Cordless Phone

Not finding what you are looking for?
Uniden TRU9480 Cordless Telephone Logo

704 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

Cindy Wells

Level 3 Expert

6073 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

martin hogg

Level 2 Expert

157 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...