For my spc440dn, can not print service mode 1103, please help. Thank you in advance for your response

Hello,download:SHOPRIDER SERVICE MANUAL 2007 1-800-743-0772.Save as a PDF File to read via an Adobe Reader.Hope this was of help,Colin.

Odds are, that the switch on the control panel PCB has a broken connector.... You might be able to resolder the connection. You will have to take the control panel "OFF" to repair it.... It is not easy to get to the PCB ...... Good Luck

Hello mmcpowers,

For the Pride Jazzy wheel chairs you can locate what you need at the Jazzy website at the following link http://www.thescooterstore.com/products/product_manuals.aspx
When on the site you will locate the chair you need and the wire diagrams are in the owners manuals. As a common problem is just a plug coming un-wired they tell you where they are and the wire configuration. If you tell me some of the other chairs you are dealing with I will try and locate the website for them as well.

Thank you for choosing FIxYa.com

Take the cartridges out and left the lid up, unplug it, plug it back in with finger on the power button and tap the stop/reset button twice. Put the cartridges in, press the color start, a test page should print. unplug it again, plug it back in .
or
Try an EEPROM reset:
Service Mode
This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
1) With the printer powered off, hold down the resume button and press the power button.
2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button. The
indicator will blink in green and remain lit in green.
3) Select one of the following service mode functions by pressing the resume button the specified number of times.
Press Resume Indicator Functions
Zero times Green Power off the printer
1 time Orange Service test print
2 times Green EEPROM information print
3 times Orange EEPROM initialization
4 times Green Waste ink counter setting
5 times Orange Destination settings
6 times Green Print head deep cleaning
7 times Green CD-R test print
8 times Orange CD-R print position correction (horizontal)
9 times Green CD-R print position correction (vertical)
4) Execute the function you have selected (except for model setting) by pressing the power button. The printer will switch itself off after performing the function.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe






I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Go into Service Mode and perform an EEPROM reset:
This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
1) With the printer powered off, hold down the resume button and press the power button.
2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button. The
indicator will blink in green and remain lit in green.
3) Select one of the following service mode functions by pressing the resume button the specified number of times.
Press Resume Indicator Functions
Zero times Green Power off the printer
1 time Orange Service test print
2 times Green EEPROM information print
3 times Orange EEPROM initialization
4 times Green Waste ink counter setting
5 times Orange Destination settings
6 times Green Print head deep cleaning
7 times Green CD-R test print
8 times Orange CD-R print position correction (horizontal)
9 times Green CD-R print position correction (vertical)
4) Execute the function you have selected (except for model setting) by pressing the power button. The printer will switch itself off after performing the function.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe








I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

The MFC-9840 manual says that this code is reporting a mechanical error.
Try to reset your machine in maintenance mode:
menu * 2 8 6 4 (within 2 seconds)
91 and then 99 to exit service mode.

User manual:
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_9840CDW_EN_2378.PDF


Brother's suggestion:

Turn off the machine's power switch and then

turn it on again. If the error message continues

leave the machine for several minutes and then
try to print, copy or scan again


Good luck.....

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response.

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

To use the wireless remote, you need to set the camera's shooting mode to one of the remote modes. The quick-response remote mode fires the shutter when you press the button on the remote. The delayed remote mode waits two seconds for you to hide the remote behind your back.

You can download a PDF copy of the manual from
http://support.nikontech.com/app/answers/detail/a_id/16087

You can order a printed copy of the manual from
http://shop.nikonusa.com/store/nikonusa/en_US/pd/productID.215425500

Walter on the Jazzy try pressing the on/off button twice to unlock Hope this helps You can go to pridemobility.com to download a users manual Hope this helps you

get your printer service and get new INK jets mean Cartage for your printer thank you it will get no vertical lines then .. it is caused when cartages are leaking..

the service needs to be turned back on altho I dont recall where u do that. Try a search on your pc for services... then turn the print spooler back on