Casio EX-Z600 overexposured pics on some zoomlevels

The best thing to do is replace the camera.

Check your "exposure compensation" setting. It should be at "0". You can set it lower if your pics are still overexposed and see if you can find a setting you like.

I have a casio exilim 8.1mp ex-z80 green digital camera. The casing is no longer presentable. Do you know where is the CASIO SERVICE CENTER here in the philippines, specially in davao city...

Here is the link for the manual. It's a pdf file, open the link and save the file to your computer. http://exilim.casio.com/resource/pdf/manuals/EX-Z600.pdf

You don't need any software for the computer. Yes you can get a manual for this camera on the web, but here is how to do it anyway. Do you have the usb cradle that came with the camera? If not, you need to purchase one. If you do, plug the ac adapter to the dc in jack on the cradle, then plug the other end to an outlet. Plug in the usb cable to the cradle, then to the computer. You don't need install anything.  Click on my computer and you should see it listed as a removable drive. Double click on it, and double click on the dcim folder. The pictures should be there.

It really sounds like an exposure setting. Check the manual exposure, it will use that setting when not in auto mode.

More than likely, you've just got a bad camera. I've helped with several problems with P/S cameras where the screens are either noisey or records a static like image. 9 times out of 10, it's the processor. Unless the camera is new or still under extended warranty..,

If you haven't contacted the manufacturer yet for an RMA do so TODAY. This is a repair for the manufacturer not for you.

The Casio Exilim EX-Z600 seems to have a high failure rate with the CCD (Charged Coupled Device). Symptoms include over-exposures (white outs) on outdoor shots and thin horizontal lines across the entire image. I have the same camera with the same problem. Given the age of the camera (2006), it is probably not worth fixing.

when the lens comes out grab it and lightly!!! push it to one side this worked on a cannon i have