How do I connect Sharp XR-10XL projector audio output to a Sony Home Theatre System DDW795?

Hi,

Please double check that you're using multiple cables from your blu ray and not just one. A coax cable can connect your bluray player to your amp and then another cable from hdmi output can connect to your projector.

If you need more help in figuring out exact cable types and detailed home-theatre setup guide, you can reach out to dolby as well by calling 415-558-0200. They do home theatre setup as well.

Thank you.

There are two way to do this.
1. Connect all your devices individually to the Pioneer receiver. Doing this allows you so have different sound settings for each input. A reason you might want this is that your DVD will need a DTS or Dolby sound setting so that you get the best audio from your DVD, whereas your TV may only be outputting stereo audio. In this case you would set your Pioneer to a stereo setting.
2. Connect your devices to the Sharp display, then connect the audio output of the Sharp to a free audio input on the Pioneer.
Your Sharp LED TV has two ways to do this: a. If you have a digital capable Pioneer sound system, connect using the "Digital Audio Output". You will need a Toslink (Optical) cable for this connection. b. If you only have analog capabilities in your Pioneer sound system, you must use the 3.5mm (1/8 Inch) analog audio output from the Sharp TV to stereo RCA (red and white plugs that are most commonly supplied with home theatre product).

Hi it is simple. Go to Menu -> Settings -> Set-up -> AV Set-up -> Video 1 input/output to Input (On your TV it will now in Output mode).

Is there a fuse in the inside back where the cord inters the projector. It might need to be replaced.

davinci DA-6.1 home theatre tokk it out of box their is only speaker wires that connect on to another no power source or wires to tv I need help

Just choose how to wiring below;


DVD Players/Recorders: Home Theater Setup, Installation & Hook Up ..

• Audio and Video Connection Guide
• What is HDMI Technology?
• HDMI Explained in Detail
• Audio and Video Definitions

Plasma or Video Projector Wiring Guide
Blue-ray Surround Wiring

HP TVs - TV Cable and Connection Types

Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE

you are to buy component to HDMI adaptor.

Connect the PS3 with HDMI to the Home theatre.

Connect the TV digital optical out put to the optical input cable of HT-BD2R provide your tv has a optical digital out put

You have the option of channeling the out put through either optical or HDMI in PS3.Go to the set up and set the audio out put to HDMI

As most home theatre systems offer no analogue audio input and only use the audio coming from the dvd being played the short answer is no.

If your home theatre system has a digital input and the tv has the corresponding output then yes you could me able to connect the two. Otherwise you could try to get hold of a analogue to digital converter and convert the tv's audio out to digital.

You must run a Digital Optical cable from your PS3 to your reciever. Then press your function button on your recievers remote until you see SAT/CABLE on your recievers display. Next go to your PS3 settings and go to Sound settings, then Audio Output settings, and select Digital out (OPTICAL) then your done. This is the only way to get true digital sound from your PS3 to your reciever.