I have an F5 error on Westinghouse dishwasher.hat do I do?

It is a water Fill Error

https://www.google.com/search?q=kenwood+dishwasher+error+codes+f5

..

.

google westinghouse dishwasher wsf6608x error codes f5

F5 signals an error in the water supply line, which may mean that the tap is not open far enough or that there is an error in water pressure

Westinghouse Dishwasher F5 Error - Water Level Fault

Fault in thermal cutout or heating pause fault. Selected temperature not reached in 90 minutes
?· Check heating element
?· Check thermostat

Fault Code F5 or Five Flashes
Cause: Spray arms are blocked/clogged or otherwise malfunctioning.
Action: Spray arms are easily removed so take them out of the dishwasher and wash in the sink to clear out any gunk (using descaler should help shift any stubborn debris). Whilst doing this run the dishwasher on a short program without the spray arms to clear any further blockages.

If your IFB dishwasher is a Neptune DX model, Error code F5 according to the owners manual is "Inadequate water supply"

F5

Inadequate water supply • Make sure the water input tap is totally open and that there is no water cut.
• Close the water input tap, separate the water input hose from the tap and clean the filter at
the connection end of the hose.
• Restart your machine, contact the service if the error resumes.

Need more information; Model? Malfunction?
Error Code h22 Not found
Error Code 20 is failure to drain STOP, OFF and SHUTDOWN
http://kitchen.manualsonline.com/manuals/mfg/westinghouse/wsf6602.html?p=15

Not familiar with this particular model but the indication is for water in the very bottom of your unit. Either due to a leak or a faulty switch. A quick leak check is to tip your unit to the side and see if water dribbles out of the bottom. Side needs to come off and either find and fix the leak or replace the switch itself. If its just a leak and you tip the water out it will actually work till the leak fills up again.

F5 according to the manual suggests you have an 'increase in temperature when element should be off" The possible cause : Faulty element, Faulty elecronics controller or faulty temp sensor.. In all cases they suggset you have your service reapir person resolve...
Hope this helps..

well since you asked on the 5th July, and no reply, doesnt look like you may get one. I thought thats what this site was about??