What is the switch on the side of the twin powerboard arlec

One video that might help, but this is a $500 camera, so take it in for service. It needs to be serviced in a clean dust free lab by men in white coats and cotton gloves.

https://www.google.com/search?q=Canon+760d+no+power

...

Alan,
Here is a link to an Arlec Heater.
Hope you can use it.
https://www.manualslib.com/manual/1332726/Arlec-Ch206.html

https://www.arlec.com.au/wp-content/files/MAL606S.pdf

https://www.arlec.com.au/wp-content/files/MAL214.pdf


Online chat and phone number at Arlect web site shown.

http://www.arlec.com.au/contact-arlec

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwiQtYHLv_3TAhUL6oMKHZKtBKcQFggkMAA&url=http%3A%2F%2Fwww.about-air-compressors.com%2Fsears-air-compressors.html&usg=AFQjCNFJoDA7qHY__FfPWRvO8EOmhOtMdQ
This might help
Sir Dana Taylor

Q1. How to set on / off times?
A1. Shift the red actuator pin to the desired on time
shift the black actuator pin to the desired off time.
Q2. What is the shortest time interval?
A2. 15 minutes.
Q3. Maximum switching times?
A3. One "on" and one "off" setting.
Q4. Can you override?
A4. Yes, use the override switch.

Note: If the main power is turned off the timer will need to be reset.

To set the timer to the current time you will need to turn the dial in a clockwise direction until the smaller arrow (Line) on the front face is pointing to the current time.

Regards,
Arlec Customer Service
+61 3 9982 5111

See if manual appears among manuals/ or arlec manuals on following links:
http://waterheatertimer.org/Woods-timers-and-manuals.html#arlec

http://waterheatertimer.org/Woods-timers-and-manuals.html#13568

Attach photo of timer

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

When place face up, dust and fibre gets in and jams up the contacts of the switch. Common problem with powerboards. Bad
contact and high current can create much heat. Be aware of fire danger.

Timer is not identified. Read through possibles options below:

Add a comment with simple description of the timer for possible identification of product and possible instruction.

If you have analog dial timer, then open following link for instructions:
http://waterheatertimer.org/How-to-set-timers.html

Following link shows a variety of arlec timers: each timer has instruction manual that expert can access. Add a comment and say which of these timers is same-similar to your timer, and then say what part of manual is confusing.
http://www.arlec.com.au/productCatalogues.aspx?ParentCatalogueID=4&catalogueID=5&Page=1

If you already have instruction sheet for timer, then add a comment and describe timer, and include what part of manual is confusing.

If you want expert to speak with you about programming the timer, then request fixya phone assistance. Expert can ask which timer you have, and answer specific questions while you program timer.

simply email Arlec: [email protected] and they will help you and send you out a manual