If you go to this address you'll see it's available to download. Full manual ; http://www.generalmanual.com/Audio/Kenwood-KDC-MP205-WMA-MP3-CD-Receiver.htm
Rich
If you go to this address you'll see it's available to download. Full manual ; http://www.generalmanual.com/Audio/Kenwo...
Rich
×
SOURCE: i have a kenwood kdc-mp205 cd player. how do i
Here is how to set the clock :
Enter standby Mode:
Press the [SRC] button,Select the "Standby" display.
Select clock Adjustment mode:
Push the control knob towards FM or AM, thenn Select the CLK ADJ display.
Enter Clock Adjust mode:
Press the control knob at least 1 second until the clock display blinks.
Adjust the Hours:
Push the control knob towards AM or FM
Adjust the Minutes:
Push the control knob towards |<< or >>|
Exit Clock adjustment mode:
Press the [Menu] button.
That should do it!
SOURCE: Kenwood Kdc mp205 clock
Press and hold the Menu button until you enter the menu. Then follow the instructions on page 20 of the owner's manual here.
SOURCE: turn aux on on kenwood kdc-mp205
In order to access the AUX option the stereo needs to be in Standby mode. To do this just hit the SRC or source button until you reach the Standby option. Now hit the menu button and scroll up or down until you reach the AUX on/off option and just turn it on. Hope you find this helpful.
SOURCE: Kenwood KDC-MP208 Clock Set
Make sure that the source is set to "Standby" when trying to access the menu. It took me about an hour to figure it out and afterward I felt like a ******.
SOURCE: Don't know how to set clock on kenwood kdc-138 without manual
change the tune mode to standby mode. Then press menu button for few second until clock word is displayed on the screen. Afterward, press the center of the main control button on the right side of the stereo system. The time is now blinking and you can start set the time by pressing upward & downward button for hour and left & right button for the minute
911 views
Usually answered in minutes!
×