Computers & Internet Logo

Related Topics:

Posted on Aug 12, 2009

Green light on charging cradle is blinking green and mouse does not work

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 09, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 09, 2010
Answers
1
Questions
0
Helped
866
Points
1

Charger cradle lights are both on- when I pur mouse in charger lights on mouse do not come on.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

The red light on my mouse keeps on blinking

Here's a guide;
What do the battery lights mean on my mouse? Some keyboard and mouse models feature a battery light that shows the current status of the batteries. The following table describes the different lights and states.
Light
Device Model Status Single long green blink Rechargeable Batteries are good. This occurs when batteries are first installed or every time that the device is turned on. Slow green blink Rechargeable Device is docked in the charging station and is charging properly. Steady green Rechargeable Device is docked in the charging station and does not need additional charging. Steady green Presenter Mouse (Japanese version) Laser pointer is on. Red/green blink Wireless Device is discoverable (trying to connect to the transceiver). Slow red blink Non-rechargeable Batteries are low and need to be replaced. Slow red blink Rechargeable Batteries are low and need recharging. Fast red blink Rechargeable Device is docked in the charging station, but there is a charging error.
Reasons for errors: The wrong type of battery is installed; the battery or batteries are missing; or the battery connection is bad.
Solutions: Make sure that the correct battery or batteries are installed, and are installed correctly. If necessary, remove the batteries, wipe them with a clean cloth, and reinsert them. Steady red Presenter Mouse (Standard version) Laser pointer is on.
tip

Peter, You nailed the problem on the head! When I implemented your fix, I...

Your battery has been depleted past a chargable state.  This is a due to a bad design in the phone that doesn't monitor the battery power state well enough.  It actually allows the battery to be taken under the minimum amount needed to recharge the battery. 

You can fix this, but do so at your own risk.

You can simply purchase a new battery, that will work, just been sure not to let it deplete the battery totally anymore.

Now, on to the fix

-Take out the battery.
-Get any usb cable you can find sitting around. (any usb wire will do, an old printer cable, anything with a usb end that can plug into your computer)
-cut one end of the plug off. You need to leave the side on that connects to your computer. Cut off the side that plugs into a device (printer, camera, web cam, etc)
-Strip the rubber off the wire and expose the wires inside.
-Separate the wires from each other. You will only be using the BLACK and RED wires.
-strip the very end of the black and red wires carefully using a wire cutter exposing the metal wire inside the red and black covering.
-Plug in your home made battery charger to your computer. Careful not to touch any exposed metal, as it will give you a small shock.
****WARNING****
DO NOT UNDER ANY CIRCUMSTANCES ALLOW THE RED AND BLACK WIRE TO TOUCH EACH OTHER
****WARNING****

-now carefully hold the black wire to the negative terminal on the battery (it should be noted with a black circle with a - in the middle). Then touch the red wire to the positive terminal (it will be noted with a red circle with a + in the middle).

Hold the 2 wires there for 20 seconds. Then quickly plug the battery back into the phone, and then plug it into a regular charger. Give it little bit of time, if you've done everything correctly the charge light should come on.

I had to repeat the last step again to get the light to turn on indicating it was charging.

You must not hold the wires to the battery for too long, 20 seconds should do it. You can overload a battery with this trick and actually make it explode if you hold it there too long. You are well within the few minutes needed to detonate the battery due to overcharging by sticking very strictly to 20 seconds.

Just be careful and you'll be fine.

One you get a charge light give it a few minutes in the off position, then try powering up the device and keep it plugged in until you get 100% charge.

Good luck,

Peter




on Jul 10, 2008 • T-Mobile MDA
0helpful
1answer

I have 2 computers both with mx700 mouse and they have worked great for a few years. All of a sudden, both have stopped charging. The green light blinks to say it is charging when in the cradle but within...

I assume you are using usb socket to charge mouse. The voltage on a USB is 5volts , you may have a problem here. It may not be producing the correct voltage. Or you may have a problem with your cradle. I would suggest you see a repair person and get them to look at the USB voltage and the Mouse cradle..
Hope this helps.
1helpful
1answer

I have a logitech cordless mouse that does not charge when placed

either ur cradle or ur battery hav been damaged...
try changin it...
0helpful
1answer

My batteries won't recharge. Normally when it recharges it blinks green, with the same speed as when it's low on power. But when I try to recharge it in the cradle, it seems to charge for a few seconds,...

Without knowing how long you have been using the mouse it's hard to say. But, my first guess would be that it is time to change the battery. Rechargeable batteries don't last forever.
0helpful
1answer

Logitech cordless laser mouse

Just leave it in the cradle for about 1 hour and see if it works.
0helpful
1answer

Digimax i5 problem charging battery

Hello,
■ Charging LED 


Charging LED 
Red LED is on = Being charged
Red LED is blinking = Charging error
 Green LED is on = Charging is complete


● If the charge indicator blinks as red, it indicates a battery charging error.
- The battery is not properly inserted
- The terminals of battery are dirty or damaged
If the battery is inserted properly and the charge indicator continues to blink, contact the
nearest Samsung Camera Service Center.


If the charging LED doesn't turn to green could mean a signal that the battery is bad or can't charge 100% anymore = too old, needs a new battery. Hope this helps.


0helpful
1answer

Logitech M700 Mouse recharging problem

try replacing batteries by newones,since they are ni-cd type,they do have limited no.of charge/recharge cycles and tend to lose performance with time.
18helpful
17answers

Charging the Mx700 cordless optical mouse

I found the following:

Red light slow blinking: Battery Low, please put mouse in charger and charge;

When in Charger Red light Slow Blinking: No charging, please check and clean Gold Plated contacts in charger and Mouse;

When in Charger green light Blinking: Charging in progress

When in Charger green light Steady: Charging complete

When in Charger Red light Fast Blinking: Mouse detects overvoltage during charging! Please clean Battery contact inside Mouse, or replace rechargable batteries NiMh 1500-2100 mAh only
0helpful
2answers

Samsung battery

Green:Fully charged
Amber:Improper connection
Red:Charging
Not finding what you are looking for?

876 views

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...