At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
This is devan from india and we are using hp designjet 430 inkjet plotter.Now we got some problem.while switch on this plotter LED is blinking.After some process it showing cartride,data and media showing red colour led is blinking.So pls how can i rectify this problem and give me suggession to how to solve this ....
turn on plotter...cartridge & data light orange....push cancel...ready light blinking green....and continues to blink green. had service clean plotter worked 2 time then did the same thing. turn on plotter...cartridge & data light orange....push cancel...ready light blinking green....and continues to blink green. had service clean plotter worked 2 time then did the same thing.
You can't post conmments that contain an email address.
This usually is solved by removing and reinstalling the ink cartridges...make sure the electrical contacts are clean (use a dry paper towel) on both the print cartridge and the carriage.
If the error still happens then the carriage or trailing cable are bad and will need replaced.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Blocked print head nozzles Inkjet printers need to be used frequently to prevent blocked print head nozzles. You may have blocked print head nozzles. Try the printer maintenance to clear the printer nozzles. After several deep cleaning attempts and there is no improvements in the print then a new print head is required. A new print head maybe expensive and it maybe more cost effective to purchase a new printer.
Try the following:
Switch the Power OFF from the back of the Printer and disconnect the
Power cord. Reconnect the power cord and power On the Printer.
if the issue persists replace the Gamut PCI PCA
If the System Error continues, replace the Main PCA.
venkateshwar,
hyd, A.P,India.
When you load the paper, the carriage edge detector measures exactly where the right edge of the paper is located. Then the paper is rolled forward and the edge is measured again. If there is a difference in the measurements, the printer assumes the paper is not loaded squarely and rejects the paper. After you load the paper and the printer asks you to align the paper, take your time, release the paper with the release lever, and line up the right edge of the paper with the right edge of the paper roll. You might have to do it more than once to get it to load. Some plotters are very sensitive and others are more forgiving.
my hp 450c plotter works properly in vista. First I' ve tried unsuccesfully to add new printer through windows menu. Then through Autocad menu (plotter manager) I added the specific plotter.
turn on plotter...cartridge & data light orange....push cancel...ready light blinking green....and continues to blink green.
had service clean plotter worked 2 time then did the same thing.
×