It is stuck on language selection and when i charge it .it doesnt charge

Selecting the Wi-Fi connected Roomba robot language.
Roomba comes with a default language pack for the robot's spoken messages. Each language pack vary by region.

1. Open the iRobot HOME App and select More ? Settings ? Robot Language.
2. Choose either from your robots Installed Languages or select from the Additional Languages.
3. On Roomba 900 Series and i Series you can choose either from your robots Installed Languages or select from the Additional Languages.

The factory default will return the robot's languages to the default pack that came with the robot.
Languages can only be changed when on your local Wi-Fi Network.

see...

https://homesupport.irobot.com/app/answers/list/

Problem is most likely in BCM, try disconnecting the engine battery for 20 minutes. If problem persists BCM reprogram required.

Hi,, today i got the solution for the problem 'Tv Stuck On Language Screen"
I have Skyworth Lcd and it was stuck on Language screen 4 days back, i've tried every sigle App and Different Universal Remotes and buttons on Tv but nothing was working except a single App named "SURE UNIVERSAL REMOTE FOR TV"
i suggest if someone face this Language screen stucking problem and no buttons and remotes are working then you should download this App on your Cell phone and select your tv and you'll surely be able to restore your Tv.

Your Phone charging IC Fault So Please change charging IC
And charging Problem will Solved Quickly




CHANGE LANGUAGE:Go to phone settings and select the option display. You can find the the settings for language there you can choose your language.


OR:
you can find in the settings>>phone settings>>language.


hope this helps.

Go into System preferences. Select Language and text.
Select the languages you would like.
OR
Insert the install disk and go though set up making sure the language you want is selected.

The * indicates the particular languages that are NOT available for selection. Page 26 of the DMC-FS7 manual describes how to change the language, but also states that a number of languages are not available - as indicated by the * symbol.

Reread the manual again and see if yours is laid out the same. If you're still having a problem, please provide the model number of your camera.

I hope this helps and good luck! Please rate my answer 4 thumbs up if it was helpful to you. Thanks!

Hi

Go to the control panel and select the regional and language setting, Tab select Language and click the detail, you get new screen Text Service and Input Language hear you can select the Keyboard language (Default English United State) and change the keyboard setting. now your get perfect key before your have,

Good Luck

because may your ipod has china quality

I solved the language problem by selecting the settings icon and then fumbling my way through the German instructions until I found something that looked like the language selection and yep, it was so it was easy enough to change back to English.

What I would do is just plug it in to your computer and leave it there ,.  leave till it is fully charged and then eject it and see what happnes .,  it might work