Uniden 6.0 Phone problem

That indicates that the phone is not synced with the base station. Try putting it next to the base station and resetting. Here are some links that may help:

Uniden Products Cordless Phones DECT 6 0

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CC4QFjAB&url=http%3A%2F%2Fwww.uniden.com%2Fpdf%2FDECT1580om.pdf&ei=HO_0VMCaAYHBUrC1g9gC&usg=AFQjCNEuoWsWGZb3TMlpBHaoUSj-HaQ7mQ

Home at Uniden America

No dial tone

it is not plugged into the phone jack on your wall? It is searching for dial tone and it isn't getting any, maybe the line cord too?

First make sure the phone jack is working by plugging a working phone into it.

if it is working, use the same phone cable to plug into the base of your new unit.

if you do not get dail tone, place the handset into the main charging base. this should sync the phone up to the base. lift it out and try again.

if you still do not get dail tone or see searching, open the phone and remove the battery. wait 30s or so, plug the battery back in and set the phone in the main charger again. wait 10second and try the phone again.

No surge suppression on the RJ11 or the power right.....

Replace.....and make sure you add a little protection on there.

On that phone, press PROGRAM the button and dial 01 STORE.

Press program again to exit programming.

It's not likely you'll be needing the Group Log In/Out button.

Carl

http://uniden.com/index/manuals_results.cfm?cat=1

open the on screen menu of the phone there should be a selection for dialing rules.. the tone dialing rule should be in that selection..

hand set no dail tone cant all out on the hand set due to no dail tone

you need to coldsolder the flash ic and cpu.