Screen was damage inside after make a picture, i see no damage outside. its maby a problem that the screen was burning in side

you need to replace the lcd, has a look here.

It deffinitely sound slike it is a relay or transistor that is either burned out, short circuited, or not working. if you have a ny replacement parts, and feel daring enough, try replacing on of the boards that controls the PIP

First thing you want to do is to find the source of the leak(s) and seal it to prevent further damage, and if not possible to get it inside, at least get a tarp over it to stop further moisture from entering. In all honesty, they are not real difficult to repair, you just need a place to remove the roof in order to replace damaged parts. Easiest way is to remove it from trailer, and go from there. If outside and sides as well as ends are still good and solid, then it's just a matter of replacing ceiling panels, which wouldn't require removing roof, but by sounds of it, if latches are falling off, and wood is rotten behind them, it may be time to rebuild sides etc. Let me know how bad it is, and include some pictures if possible, and we can guide you through it. Be sure to take pictures before, for your own reference when re-assembling.

The lens has suffered impact and the shutter or aperature blades have been damaged and are jamming. The camera needs repair / replacement parts.

it's a good time to go get a new phone. that much damage would cost more in repair that it would to either replace or upgrade to a new phone.

99.9% CCD is going bad.
Common problem.

There is a mode these set run in that stretches the side so the screen is completely filled, this is so the people do not seem all fat and short, this mode is known as Panoramic, this is one of the screen settings you can choose, I believe your set has a 4X5 or normal mode, 16X9 and maby a 16X9 zoom, the panoramic and maybe one more, find the format button on the remote and cycle through them

well . there are 4 things that can cause this..
1= the outer screens could be dirty.clean with screen protector cleaner.Spray on cloth and not on outer screens.
2= outside lenses of picture tubes could be dirty.Unit can be opened .Outside lenses can be cleaned with a lens cloth .Do not use paper towels or cotton as this my scratch surfaces of lenses.
3= inside of picture tubes could be dirty.This should be done by a repair shop only(dirty coolant inside tubes)

Are you shooting in raw format - file ext =nef., or jpeg.
Is your computer screen colour calibrated correctly?

admiral is a maytag owned company which is now owned by whirlpool. so contact maytag or whirlpool. google them should be eay enough to find..