Website is right screen centered for one given website. want to display it at center screen

This not a DIY job. The display is a computer drive device and even if you knew the problem you can't buy parts to fix it. Check online for facilities that repair the center solid state control touch screen. You must send it out for repair.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

This question is a bit old, but to help others with similar issues like this here are some tips:
• Press the Home Button
• Double click the Home button quickly and choose another app to switch to
• Hold down the power button and shut down when given the choice on screen
• Hold both the Power button and Home button until the computer displays a white or black Apple logo in the center of the screen

TRY RIGHT CLICKING YOUR MOUSE HOLDING IT DOWN ON YOUR PICTURE AND DRAG IT TO THE RIGHT.

IF THIS DOESN'T WORK...THEN, LEFT CLICK ON YOUR DESKTOP...GO TO CUSTOMIZE MY DESKTOP...CHANGE HOW YOU WANT YOUR SCREEN DISPLAYED.

HOPE THIS HELPS!

hello


right lick on the internet icon right side down of your monitor screen and select open networking sharing center and at the left side upper corner you see change advanced sharing center click for that one and turn on your TURN ON NETWORK DISCOVERY AND FILE PRINTER SHARING.


Thanks

When the Reader device is started for the first time or is reset back to factory settings, the screen must be calibrated. The Reader device will display a calibration screen that requires you to touch the stylus to the center of an "X" at several points on the screen. This is to make sure the touch screen properly recognizes input.
The process requires you to touch the "X" in the following locations on the screen:

• Top left
• Bottom right
• Top right
• Center

If the screen is accidentally touched someplace other than the center of the "X" during calibration, the Reader device will display a message stating Calibration error detected. Please restart calibration process .
If this happens, please start again in the top left corner and touch the stylus to the center of each "X" as it is displayed, being careful not to touch any other part of the screen. After the sequence is completed the Reader device will display Touch Panel calibration completed . Click OK to continue to the next step in the setup process.

does the screen appear distorted;does it move as you shift left/right/up/down? IF THIS IS TRUE, YOU PROBABLYHAVE THE RESOLUTION SET WRONG....RIGHT CLICK ANYWHERE ON THE SCREEN;PROPERTIES;SETTINGS; ADJUST SLIDEBAR TO PROPER RESOLUTION FOR YOUR MONITOR

right click on an empty area of the desktop > scroll down to where you would see something like Nvidia control center or ATI control center. Open the control center and look for display orientation, this is where you can change the orientation of the screen.

Adjust the display resolution via the contrl panel until you find the one which best suits your TV

hi...
It sounds like an Intergrated Circuit (IC) has fried.
Your best bet in this situation is to contact ur tv service operator and let them recommend an authorized service center in your area....

rate me!!