Can i add an external paging speaker to my nec dtu-16d-2 phone?

https://www.manualslib.com/manual/110148/Nec-16d-And-8d.html


NEC 16D and 8D Quick Start User Manual

Hello, That would be a system ring group programming feature. It would depend on the type of phone system you have. NEC Elite 192, Elite IPK, Elite IPK 2. There are different platforms and this would determine how to program it.

Whoever is your voicemail administrator can reset password to default, and add or delete mailboxes. When they log in to their mailbox, they have access to manager options.

turn the phone up side down you can see the ringer switch on off and the ringer volume try to adjust them to on..then test the phone ringer if nothing happen the ringer speaker must be faulty and needs replacement..

Press Feature and then 1. This will turn on the MIC.

you would need to enter system programming mode and change MB 1-8-31 to external. The internal music is pretty bad. This works on elite and ipk platforms. It depends on your system type. Look at the phone system and see what letters it has on it.
ldtsnj.com

WHILE the phone is ringing, push the down arrow key.

hi,1.to adjust the ring tone volume. from your phone set,press speaker dial 601.press the arrow key up or down to adjust. 2. if your station is programmed as system admin phone,then you can press feature 80 feature.to toggle between day or night.do not press speaker button while doing this. 3.the headset port need to be program,or you can do without it,by purchasing the headset came with the adapter and connect thru the handset cord. the new model is DTH-16D. CAN email me if you need a new phone, [email protected]

I am assuming this is on a DTU 16D nec phone. On the right side of the phone is a volume up and down button. If someone calls you, you adjust this while the phone is ringing. If you adjust it after you answer it controls the voice volume (what you hear through the ear piece) if you adjust it while the handset is down but there is no one calling you it adjusts the display contrast on the phone.

Adjusting the ringer will depend on the type NEC system you have. On the PRO II, Elite, and IPK just press the Speaker button and dial 601. The Phone should begin to ring and you can then adjust the volume with the up and down arrows.