Need code for teac hdb849 for sensai remote or harmony logitec remote please

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

Try a Harmony remote by logitec. One remote will replace all the remotes you have in your system. Go here for more information: http://www.logitech.com/en-us/harmony-remote

Purchase a Logitec Harmony remote. When you set it up, the software asks for the device you intend to control. Enter in your make, and model number. After the remote setup is complete, you should be able to control it.

I would check on the logitec website (logitec.com) before you purchase to make sure your device is supported before making the purchase. But they support just about anything under the sun.

Hi.

Perhaps you do not already have the Harmony software installed on your PC?
If not, it's on the CD and you will need the USB cable to connect the remote to PC, but that comes much later after you have constructed a configuration on your Logitec account. Then the 550 should certainly be able to show more than just the welcome message.

You don't really need the CD because you might as well download the latest software version from the Logitec website for 550, install it on PC, and get the full instructions there.

Next register using the software on PC and check that you have the the latest firmware according to the instruction manual. The on-screen guide on PC will lead you through making a configuration for your devices.

Regards
Chas

When i went into the Harmony software, your TV did come up. If these codes aren't working try a different model Samsung (like UN46D6000). All new Samsungs use the same code set. If this still doesn't help, go to "Devices"->"Settings"->"Adjust Inputs"->"Method 3". Follow the directions from there. Something else that may help is Samsung calls it the "Source" button, Logitech calls it "Input x".

I find that with my HDB849 I have to be very carefull with the positioning of the aerial/rabbit ears to get all the channels to (ABC, 7, 9, 10, SBS and their sub cahnnels) to recieve them at all. Also once you get all the channels it is prone to digitization or pixilation at times due to bad weather/very overcast days.

Try the Teac.com.au for a firmware upgrade as this also solved not being able to view avis & images, listen to mp3's etc.

Overall the majority of reviews say the HDB849 is to be avoided.

Once set up correctly through trial and error and an absolute shitload of patience and re-tuning it seems to operate fine. Just pray you do not get a power outage or you have to start all over again.

Last point, try the teac 1300 number in Australia (or relevent country) and harras them for info whilst trying to stay calm and nice with the unlucky "tech support" person

We can not get ABC on TEAC LEDV1 982Hd when tuning in. How do we resolve this problem?

Hey!

I have come across this issue and the link below helped me get my harmony remote working again:

http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=11941

I hope this helps you like it did for me!!

-Kennedy

I can help you program your Logitech Harmony 520 remote for your Teac CD-X10i.

The Logitech Harmony 520 remote control is programmed through the Harmony Setup Software you can download from here.

Once installed, you will simply run the software, and select the devices you would like to control from menus. The software finds the right codes for you and loads them into your remote control.

I hope that helps.
_____________________________________________
Harmony 520 Manual Download
Logitech Harmony Firmware Update
Harmony Win Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

If the GE doesn't have a code scan function (similar to ExpressVu remotes) then you can always buy a programmable remote such as the Logitec Harmony. I tried it and it works fine on my Magnasonic GCT5501.