Necchi Sofia 300 the needle moves to the right when I zigzag but I need it to move to the right for 1/4inch seams and need to avoid the feed dogs? How can I do this? Nothing in the instructions.

SOURCE: Feed Dogs, Thread Tangle

Hi Jeanette! You have a Singer Featherweight--the best sewing machine ever made! (Mine dates from 1950/51 and I wouldn't trade it for the world.) These beautiful, sturdy machines were designed to be easily repairable at home, but you'll need a copy of the Service Manual (get the Instruction manual too, if you don't have one.) Go to www.singer-featherweight.com and check out what they have available.

I had a similar problem (needle thread not catching the bobbin thread) and the problem was that I hadn't put the needle in correctly (flat side to the left). Also, I will occasionally get thread wrapped around the bobbin housing--sewing along just great and then everything comes to a screeching halt. I'm not sure why that happens, but I'm getting pretty good at taking the bobbin housing apart. The manual is pretty clear on how to do it. You can contact me direct at [email protected] for more information.

Thanks!

Robbie

SOURCE: singer stylist sewing machine 534 is not stitching

Feed dog drive gear(2) are plastic and are probably stripped. Always replace them in pairs. While you are at it replace both hook drive gears as well. It will run as good as new.

SOURCE: singer 2662 only does a straight stitch

got the same problem - wish I could help you -

SOURCE: feed dogs won't work

Take your machine to an authorized Bernina dealer for service.

Proper service and care will ensure the value of the machine.

This brand holds it's value better than any other brand and always resells for good prices on Ebay.

You can check the Bernina website for dealers in your area.

SOURCE: necchi sewing machine problem

needs to be serviced