I need to adjust bass and treble on the 65uk 7500 model

SOURCE: finding treble and bass adjustments on my stereo

Here is a manual for the radio. If you go to page 14 it will tell you how to set the EQ.

http://vault.alpine-usa.com/products/documents/OM%20CDA-9835.PDF

Good Luck Please Rate FixYa!

SOURCE: adjust

I have an Alpine CDA-9813 and to access bass, treble, fade, and balance, you need to press the volume button. This button is usually rotated to adjust the volume but on mine, if you press it in, first time accesses bass, second press accesses treble, 3rd press accesses balance(left to right), and 4th press accesses fading (forward to rear. Press it a 5th time and it either brings you back to volume or back to the main screen. I think it is volume tho. I would assume that the 9853 would work very similar, if not the same.

Frank Fulton

• 1114 Answers
• Posted on Jul 01, 2009

SOURCE: How do I use the remote to cont bass & treble for rxv-657 reeiver

No, Tone controls are on the front of the unit only. If your passing video thru the unit you can go into the setup menu from the harmony and adjust all the sound parameters that way "on screen" The only "EQ" capabilities are for the Center channel only. You can adjust "speaker size". "Large" setting will give you a little lower response. "Small" will crossover the speaker at "100hz" That's about as far as tone adjustment goes on this unit. Hope this helps

Bud Martin

• 11361 Answers
• Posted on Nov 10, 2009

SOURCE: adjusting bass and treble

You can download manual here and see what it can do without remote.
http://audio.manualsonline.com/manuals/mfg/panasonic/panasonic_sa_saxr25.html

SOURCE: How do you adjust the bass and treble on the

Here is the link to the instruction manual for your head unit.

http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Consumer/Manuals/kdcbt742u.pdf

There are a number of places it mentions adjusting bass and treble levels.