Hard reset factory ACER V9800 UHD 4K
As Bob Myers mentions, the question can't be answered unless you explain which video output the camera has. The solution for a BNC CCTV camera would not be the same for a PoE IP camera. Provide that information, and we can suggest hardware that would connect your TV sets and project to the camera feed.
SOURCE: on screen display on monitor locked and need to restore factory settings
Hold the menu button down long enough and it should unlock, if it unlocks and then locks back up immediately, you have a problem on the main board
SOURCE: htc touch diamond non responsive align screen after hard reset
its easy i had the same problem and i fixed it the same day.u just hav 2 clik on the 4 corner of ur phone and its gonna ask u do u wanna save it or not then thts all all and u move onto the nxt step
SOURCE: Install problems at AVR 142
ensure that you have the reciver connected to a display monitor e.g t.v. set, there you'l be able to make all the necessary ammendments.use the video out or use the HDMI out to connect to your t.v.
which speakers are using for the avr 142?
SOURCE: how do i reset my acer travelmate 5520 to factory
start computer when acer logo appears press F2 to go into BIOS settings scroll across to BOOT top menu bar with the arrow buttons scroll down to D2D enable/disable change to enable and ENTER. save and exit. restart computer once again when acer logo appears press <Alt>+<F10> at the same time to enter the recovery process, refer to on screen instructions to recover system.
SOURCE: Acer projector P3150 locked with passwd
Read some Acer manual and it says:
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
• Press "Play" to change the "Administrator Password".
• The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to
retrieve the administrator password:
• An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
• If losing this security card and number, please contact with an
Acer service center.
79 views
Usually answered in minutes!
×