Hi. I can’t open my Hoover 7kg VisionHD washing machine door which is displaying E08. Any advice about opening the door? Thanks.

E08 is the motor speed sensor error code. Suggestion: Try a cycle with very few garments and see if it completes the cycle.

https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e08-error-code-on-a-hoover-washing-machine

Hope this helps.

https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e08-error-code-on-a-hoover-washing-machine

http://service.hoover.co.uk/manuals/OPH714D_1.pdf


user manual

http://www.whitegoodshelp.co.uk/hoover-error-8/

here is a description of the common error your machine has
and how too solve it

hope it helps you...

That's E08 (E-zero-eight). Speed sensor on back of motor faulty, or the wiring to it. Can also be a broken magnet in the middle of the sensor coil.

Error code: h05 coming up when i switch on the tumble - Fixya

www.fixya.com/support/t8443068-error_code_h05_coming

Feb 24, 2011 - Question about Washing Machines. Open Question ... SOURCE:Hoover washer/dryer VHW854D SHOWS ERROR. I have exactly the same ...

I have a 3 month old Hoover washing machine [DYN10146P ...

www.fixya.com > Forum > Washing Machines

Aug 11, 2011 - I have a 3 month old Hoover washing machine [DYN10146P] with aH05 fault. ... Have just looked in the service manual, it reads: Error 9 - Cancel the programme by returning the selector to the OFF .... show e-60 on screen.

Hoover and Candy Washing Machine Error Codes - YouTube

? 5:00
https://www.youtube.com/watch?v=kzhlvB2LjXg
Sep 1, 2014 - Uploaded by eSpares
Does your Hoover or Candy washing machine stops before .... I have a question: My Hoover displays the error code E08. what can I do to fix it?

1. please provide the model number for the washer
2. this is a timer error code and it seems that it locked the door during the spin cycle.
There may be a malfunction sensor or you will need to unplug the washer to reset the washer to complete the cycle.
Something electronic has caused the washer to shut down to protect the electronic circuit. You may have a defective timer.

Check wall socket , Check machine door interlock switch, you may need multimeter to do further checks....

hi I had this fault, google said it was tachometer fault. the e08 fault on my hoover optima was not the tachometer, i checked it, but the fix was very easy, the motor brushes were worn out and i changed them for 10 quid, I made a video of it its on youtube http://www.youtube.com/watch?v=xYn-f78GB4U and it shows you how to test the tacho and how to change the brushes, hope this helps someone

Hi there,
Either clip on the door is faulty or its the door interlock in which the door locks into easily replaced by undoing the clip pullling back the door rubber and replacing ..