To reset your Parrot 3200 LS speakerphone, you can follow these steps:
- Press and hold the "ON/OFF" button for at least 10 seconds.
- Release the button when the LED indicator on the device starts flashing red and blue.
- Press and hold the "ON/OFF" button again for at least 10 seconds until the LED indicator turns solid blue.
- Release the button. The device is now reset and ready to be paired with a new device.
Alternatively, you can use the button on the back of the device and press and hold it for 10 seconds.
It's important to note that resetting your speakerphone will erase all of your stored contacts and settings, so you will need to reconfigure them after the reset.
Also, make sure that the speakerphone is not connected to any device via Bluetooth or wired, as it might be necessary to turn the device off to reset the speakerphone.
Keep in mind that a reset is a troubleshoot step and if the issue persists after the reset, it's recommended to contact the manufacturer for further assistance.
×