Televison & Video Logo

Related Topics:

Ross Everett Posted on Apr 13, 2019

Sylvania model srt2232x 32" CRT. It was on and just went off and will not turn on in any manor. Fuse is good, everything looks as it should I believe. I know it is old school but it fits the tv hutch.

Sylvania model SRT2232X 32" CRT

2 Related Answers

Anonymous

  • 513 Answers
  • Posted on Mar 23, 2006

SOURCE: 32" Sylvania SRT2232X

If still under warranty or if you have no electronic repair experience you should take the set back to the shop or to a repair person. Some of the solutions described below can be dangerous, TV's are very hazardous to service. Even when plugged out, TV's can store very high voltages. Generically speaking anything in the horiz deflection, hv development area will cause a no pix symptom, also a problem in the signal processor section, video river and output section as the crt/socket assembly. I would also check the lopt transistor and probably the fuseable resistors around the lopt.

Ad

Anonymous

  • 8 Answers
  • Posted on Sep 22, 2009

SOURCE: Problem: my sylvania SRT2232X 32 inch has green tint on every cha

A green tint can be caused by over drive of the green circuit or lack of enough red or blue.Either way it leads back to the tube having a problem. If it is even available the cost of replacement would well exceed cost of buying a new TV.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Sylvania tv problems

Main board fault. Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
0helpful
1answer

I have a Sylvania SRT2232X I want to go up to channel 151

Refer its user manual for details. It has all. If you haven't it, download by this link.
0helpful
1answer

My Sylvania 32" Tv Model #SRT2232S won't turn

Hello
There is a fuse inside the power supply bard of your sylvania TV. Check whether it has blown out. If bllown out, replace it with same type bothe in size and amperage. If the newly inserted fuse also blow up as soon as you switch on the set, make sure that the power supply section has some short circuit in it, and should be cheked well. OK.
0helpful
1answer

Problem: my sylvania SRT2232X 32 inch has green tint on every channel

A green tint can be caused by over drive of the green circuit or lack of enough red or blue.Either way it leads back to the tube having a problem. If it is even available the cost of replacement would well exceed cost of buying a new TV.
0helpful
1answer

I have a sylvania srt2232x. We are having a

pls resolder the system ic and there area
0helpful
1answer

Desconectar

Decime el modelo de tu televisor tiene que ser un numero como este

Sylvania SST4324S 32"
Sylvania SST4324A 32"
Sylvania SST4324 32"
Sylvania SST4323 32"
Sylvania SST4322 32"
Sylvania SRT2432S 32"
Sylvania SRT2432P 32"
Sylvania SRT2323 23"
Sylvania SRT2232X 32"
Sylvania SRT2232S 32"
Sylvania RSET432E 32"
Sylvania RSDCT3203 32"
Sylvania LD320SS8 32"
Sylvania LC320SS8 32"
Sylvania C6432TE 32"
Sylvania C6432TD 32"
Sylvania 6632LG 32"
Sylvania 6632LCT 32"
Sylvania 6432TFY 32"
Sylvania 6432TF 32"
Sylvania 6432TE 32"
Sylvania 6432TD 32"
Sylvania 6432GG 32"
Sylvania 6432FE 32"
0helpful
1answer

Sylvania srt2232x vertical size

Before you replace any parts, have someone (TV service tech) check the vertical size settings in the service menu.

Happy viewing!

Toprol
0helpful
1answer

Syvania 32 in. srt2232x

Sounds bad im afraid. If its worth it your best to take to a repair shop. If not it might be a gonner
0helpful
1answer

32" Sylvania SRT2232X

If still under warranty or if you have no electronic repair experience you should take the set back to the shop or to a repair person. Some of the solutions described below can be dangerous, TV's are very hazardous to service. Even when plugged out, TV's can store very high voltages. Generically speaking anything in the horiz deflection, hv development area will cause a no pix symptom, also a problem in the signal processor section, video river and output section as the crt/socket assembly. I would also check the lopt transistor and probably the fuseable resistors around the lopt.
Not finding what you are looking for?

63 views

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...