I'm working on it guys give me.. schematic Gigabyte GA-F2A55M-S1 mb..
SOURCE: Gigabyte GA-945P-S3
1. 4 DDR II DIMM memory slots (supports up to 4GB memory)
2. Supports 1.8V DDR II DIMM
2. Supports dual channel DDR II 667/533/400 DIMM
SOURCE: do you have a schematic diagram of the Gigabyte
http://www.gigabyte.com.tw/Support/Motherboard/Manual_Model.aspx?ProductID=1417
Testimonial: "many many thanks juyruyrfiujh"
SOURCE: how to change bios setting on GA-F2A55M-DS2 motherboard to install XP
The BIOS should not prevent you from installing Windows XP.
If your hard disk is a SATA hard drive then -
The problem is that XP installation CD does not have a SATA driver, unless you have a SATA drive on a disk etc. and can install the driver when XP asks for a hard drive driver then, XP cannot detect the hard disk and therefore won't install XP. The FIX. Go into the BIOS and disable the SATA drive (enable IDE emulation), this will make XP think it is a IDE/PATA hard disk. Then you can install XP normally. When Windows has been installed then install all the device drivers (including the SATA driver), then shut down and boot up and got into the BIOS and enable the SATA drive.
350 views
Usually answered in minutes!
×