Front load ifb washing Machine showing the error of plz close the door??although door is perfectly closed again and again its showing the same error at every wash.After 2,3 tries it starts not at a single start

The door switch might need to be replaced if it is damaged.
https://www.youtube.com/watch?v=9q05uhmr3ZE

Recheck the door, seems is not closing well enough

the door is not closing properly so not making the door switch contact to tell the controller to go to the next cycle replace the door lock problem solved eric

it may be due to door lock switch problem

Visit the sites linked here for more details about the error cddes to many brand washing machine, and dish washers.
http://electrotechnician.blogspot.com/
https://electronicshelponline.blogspot.com/
http://homenol.blogspot.com/

Cannot find anything about H1, but error code E01 is door not closed properly. An instrument at work sometimes reads "h1" and this indicates a "high" reading, but don't know if that is really relevant here. Sorry I can't help any further. Good luck.

In IFB Machine LO Error Code indicates Low Voltage Problem. We have the best quality Automatic Voltage Stabilizers. Gelco Automatic Voltage Stabilizer GA400 model will solve your problem. GA400 Voltage Stabilizer to up or down your incoming Voltage from GEB. It has a capacity of 12 amp and 15 to 20 Voltage up / down capacity.

We are sure this Gelco GA 400 model will solve your problem.
You can Call on: 9722658052 or 9427347880
Thank You

LG WFT70A37ECT Top load washing machine, showing DE error... even door is close still showing this error. that is the solution... really appriciate... thanx