Necchi k132 a
SOURCE: Necchi 525 FA model
This site (www.sewusa.com) sells manuals for many types of sewing
machines. It also has a section (on left side of home page) that
provides basic information about treading (bobbins too) and repair.
I
also own a 525 FA and just read that someone considers it is a piece of
junk. I'm having problems with the tread breaking constantly (with many hours
spent on this problem) and I even have a manual! Perhaps it is a
piece of junk?
Good luck!
Marla
SOURCE: 6022 necchi sewing machine
There is a site that has instructions with how to thread the machine properly. Click here for the www.sewusa.com threading section
SOURCE: necchi 534FB
I solved this problem for a friend,!. the needle was in the wrong way and
2 the bobbin case was not properly seated be sure you hear the 'click 'when
reinserting the bobbin case...hope this is helpful Velz
SOURCE: AUTO THREADER CAME OUT
When you activated the threader, the needle was down and the threader came off or broke.
If it is not broken, you may be able to push it back into place.
Turn off the power and tip the machine back on some towels so it does not slip and with a flash light check the area where it fits and see if you can get it back into position.
If not, will have to thread the needle the old fashion way.
Check with your Brother dealer to see if they can look at the machine while you wait.
They may be able to get it back together or they will have to replace the threader.
It is possible they will have one in stock, or they may have to order it.
80 views
Usually answered in minutes!
×