Check the paper size settings to match the loaded paper. This would happen (for example) if you have loaded A4 paper but your driver is set to print on letter format. Letter is wider than A4 by 6mm and while the printer is trying to print near to the right side, assuming the paper is wider, part of the ink goes on the paper support. Other reason may be the paper size in the document is set to be larger than the loaded paper format and driver prints only what can be fit on the loaded paper.
SOURCE: HP DESKjet 2050 ALL-in-ONE J510 CAN'T GET IT TO
Try to reinstall the driver with your Pc's. Maybe its not properly install.
SOURCE: I need a user manual for HP Deskjet 2050
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=4027469&lang=en&
SOURCE: i Have just purchased one
Have you installed the driver for your computer and pluged in the contacts right?
SOURCE: hp deskjet 2050 all in
não estou consiguindo instalar minha impressora hp deskjet 2050 all-in-one j510 serie faço todos os procedimentos mas vem uma mgs pedindo hardware compotivel o que devo fazer?
Ink is full but nib is faulty will pen writes? similarly cartridge refilled with ink but nozzles are clogged/blocked then print wont happen properly..before refilling the cartridge check nozzle status, clean nozzles properly then refill it. Remedy1:Take little warm water pour in small container dip nozzles in water wait some 2-3 minutes clean nozzle area with dry smooth cloth...try it till print quality improves..Remedy2: You can do clan/align process through printer drivers properties..
62 views
Usually answered in minutes!
×