Model FP1200. How can I turn off blinking "new call" light?

I have a Uniden FP1200 LCD Display Caller ID Speaker Phone
I have no dialtone and when you pick up the receiver the time begins to count as if I am on a call
Thanks
Karen

motor is out because using processor more tan 3 minutes.it is my fist time using this processor

Available replacement parts for Black & Decker FP1200 Quick N Easy 8 Cups Food Processor can be found here:

http://www.directpartsandproducts.com/food-processors-fp1200-c-1_378_413.html

or

http://www.abtecparts.com/Black_&_Decker_food_processor_fp1200.htm

Replacement parts are available here:

http://www.directpartsandproducts.com/food-processors-fp1200-c-1_378_413.html

or here:

http://www.abtecparts.com/Black_&_Decker_food_processor_fp1200.htm

What model is the projector? Manufacturer and model.

power light if it shuts down should blink a error code--count the blinks and a pause?


SD TECH

Hi,

You can download the instruction manual in PDF format by clicking this link.

• You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

your mainboard is damaged, to order a new one you will need your product code and model, both located in the back of the TV next to the serial number

go to www.estore.fox-international.com
look for Black and Decker products
or call 1-800-738-0245 mon-fri 8:30am-8:00pm E.T.
ordered a slicing blade for model FP1200
very easy

It will have to be diagnosed. As the only blinking light error for that model is when the led turns from green to flashing red which indicates a lamp error. If its new I recomend returning it most retailors will freely exchange a new TV . Wish I could help more but there is no diagnostic codes for that model other than lamp error. And being that I am taking that the back light isnt working either. I would contact the retailor without delay.