Samsung printer model SCX - 4321 ?? IP address.???? ??? ?????

It is assigned if you have it on a network.

SAMSUNG SCX-4521F SERVICE MANUAL ' Manualzz

manualzz.com https://manualzz.com > ... > Print & Scan
Ping command can see the printer. If an IP address is not allocated to the printer or it is in a different. LAN segment then ensure that either IPX/SPX or ...

Setting Ip Address - Samsung SCX-4500W User Manual ...

ManualsLib https://www.manualslib.com > ... > User manual
In a few situations the IP address must be set manually. This is called a. static IP and is often required in corporate Intranets for security reasons.

..

1, A scanner locked error appears on the control panel of the Samsung SCX 432 printer, this occurs when the scanner head is not able to move. Try doing the following to resolve the error, press the Stop or Clear button.
2, Power Off the Samsung printer. Remove the power cord from the rear of the printer. Wait for a few seconds. Turn On the printer again, this unlocks the scanner.
For more printer related queries get in touch with our experts by just giving a call @ 1-866-293-9220

the lsu will have to be replaced. the lsu is stuck most likely

check the ink and clean. if it persist change the cartridge.

how to use scx 4321ns samsung printer cartridge again and by reprogramming it using software

SAMSUNG SCX 4321 TONER EMPTY RESET
MENU
UPPER LEVEL
LEFT
RIGHT
UPPER LEVEL
ENTER IT WILL SHOW TECH MODE

HIRA THAKUR ([email protected])

MENU
UPPER LEVEL
LEFT
RIGHT
UPPER LEVEL
ENTER IT WILL SHOW TECH MODE

MENU
RIGHT RIGHT RIGHT RIGHT
NEW CARTIRIDGE
ENTER
YES
MENU
UPPER LEVEL
LEFT
RIGHT
UPPER LEVEL
ENTER

:) SOLVED : )

itz very simple to solve ths just contact me on 8793200080 or on facebook www.facebook.com/chocob0y

Here you go, I got the drivers for you. There are 4 drivers listed for download, but I chose the following link here so you can install it and get everything going first. Here is the link to the Universal SCX-4321 driver:

http://www.bstdownload.com/get/34733/

Here is a link to the info sheet and it has the 3 other download links:

http://bstdownload.com/appdownload/samsung-scx-4321-printer-driver/


Good luck!!
EJ Kudelak

Hi,

your paper feed pckup roller has already worn out. it got to replace to resolved this issue.

You could try having your Samsung SCX-4500 print out a network configuration sheet. It will have the printer's IP address, default gateway etc.:

1) Press the <Menu> button on your printer panel
2) Scroll using the (<) or (>) navigational arrows until "Network" is displayed
3) Press the <OK> button
4) Scroll using the (<) or (>) navigational arrows until "Network Info" is displayed
5) Press the <OK> button

Your printer should print out a network configuration sheet. The IP of the printer appears in the TCP/IP information on this configuration sheet.

Note: Your printer's IP assignment should be "Static" not "DHCP" (You may skip the following steps if your printer's IP assignment is already "Static")

To change your IP assignment from DHCP to Static:

1) Open up your Windows browser
2) Type in the printer's IP address in the address (location) bar of your browser:

Example: http://192.160.0.100 (use the real IP you found above from the network information sheet)

3) SyncThru should load - Click "Network Admin" or "Network Settings"
4) Click on the "TCP/IP" option on the left side
5) Change the IP address METHOD to "Static"
6) Click <Apply>, then <OK> or <Exit>

Now your printer is ready to be added to your network. You have the information you need from your network configuration sheet. Your install should now proceed smoothly.

I hope this information was helpful!