I have a Magic Chef CGS3760ADB and noticed when the oven got up to temp there would be a "POOF" sound. Yesterday all 4 burners on the top won't light. No clicking sound or anything. are they related?

The temperature sensor in the oven needs to be replaced. Here is the part to order. As far as the top element, lift the top up and look for lose or broken wires on the element. Keep me posted.

Hello & Welcome to FixYa
If the pilot is clean and still won't light then the problem is with the safety valve that won't open and so needs replacement. Please get back to me if you have any other questions.
Kevin

Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

the ovan could be a thermostat 3" 2 6'' long probe my first gess or the ignitor top you need more help with could be a lot of things hope this helps a lititel

replace oven igniter and oven burner. clean top burners

Replaced the ignitor.

you may need new coupler on pilot system

1. After self cleaning the range the door won't open
   
2. Amana gas range conversion from NG to propane
   
3. A tip on cleaning the surface grates
   
4. Checking an common oven temp sensor
   
5. Checking an common oven temp sensor: What does an oven temp sensor look like?
   
6. Gas range repair aid - such as, my oven won't work or heat up, which style of gas oven do I have, the glow coil gets red but my oven burner will not light.
   
7. GE gas range conversion from NG to propane
   
8. How to change the oven temp on some common electronic controlled ovens
   
9. How to re-light a surface or oven pilot light
   
10. How to change a common oven glow igniter coil
    
11. How a common gas valve works - click here.
    
12. How Ranges, Ovens, and Stoves Work
    
13. Help for storing an appliance
    
14. Important Disclaimer
    
15. Installing a gas flex line connector
    
16. Maytag, (some) Magic Chef, (some) Jenn-Air gas range surface spark module - new module kit
    
17. Maytag ( Magic Chef - Crosley - Jenn Air ) gas range conversion NG to propane
    
18. My gas range flames die when I turn on more than one thing at a time
    
19. My Range is flashing an " F1 F2 F3 F4 F5 F7 F9 " something, what does this mean?
    
20. My surface burners keep "clicking" even after the burner is light
    
21. Oven door and door hinge help
    
22. Oven temp sensor - how to change helps
    
23. Repair tips and information on surface burner spark modules and igniters
    
24. Some "how to set the self clean" on my range
    
25. Stainless Steel Cleaning
    
26. Surface burners wont work
    
27. This morning I noticed the range top ignition was clicking all by itself every 15-30 seconds
    
28. Test for F1 fault code
    
29. WCI - Frigidaire ( some Kenmore's ) gas range conversion from NG to propane
    
30. WCI - Frigidaire /open burners/ (some Kenmore's) gas
    
31. Whirlpool Direct Spark Ignition (DSI)
    
32. Yes, your glow bar igniter can glow red and still be bad!!
    

 

1. After self cleaning the range the door won't open
   
2. Amana gas range conversion from NG to propane
   
3. A tip on cleaning the surface grates
   
4. Checking an common oven temp sensor
   
5. Checking an common oven temp sensor: What does an oven temp sensor look like?
   
6. Gas range repair aid - such as, my oven won't work or heat up, which style of gas oven do I have, the glow coil gets red but my oven burner will not light.
   
7. GE gas range conversion from NG to propane
   
8. How to change the oven temp on some common electronic controlled ovens
   
9. How to re-light a surface or oven pilot light
   
10. How to change a common oven glow igniter coil
    
11. How a common gas valve works - click here.
    
12. How Ranges, Ovens, and Stoves Work
    
13. Help for storing an appliance
    
14. Important Disclaimer
    
15. Installing a gas flex line connector
    
16. Maytag, (some) Magic Chef, (some) Jenn-Air gas range surface spark module - new module kit
    
17. Maytag ( Magic Chef - Crosley - Jenn Air ) gas range conversion NG to propane
    
18. My gas range flames die when I turn on more than one thing at a time
    
19. My Range is flashing an " F1 F2 F3 F4 F5 F7 F9 " something, what does this mean?
    
20. My surface burners keep "clicking" even after the burner is light
    
21. Oven door and door hinge help
    
22. Oven temp sensor - how to change helps
    
23. Repair tips and information on surface burner spark modules and igniters
    
24. Some "how to set the self clean" on my range
    
25. Stainless Steel Cleaning
    
26. Surface burners wont work
    
27. This morning I noticed the range top ignition was clicking all by itself every 15-30 seconds
    
28. Test for F1 fault code
    
29. WCI - Frigidaire ( some Kenmore's ) gas range conversion from NG to propane
    
30. WCI - Frigidaire /open burners/ (some Kenmore's) gas
    
31. Whirlpool Direct Spark Ignition (DSI)
    
32. Yes, your glow bar igniter can glow red and still be bad!!
    

 

Sounds like the ignitor in the oven is weak and not building up enough resistance to the gas valve to allow gas to the burner. I would replace the ignitor if it is more than 3 or 4 yrs. old.