I recently repaired my coolpix s5100 and it seems like there's some firmware updates for it. i wanted to update it. according to the settings menu its current version is 1.0 (probably factory version)
SOURCE: Firmware upgrade to GE-Thomson 28310 2 in 1 Skype/Landline phone
You must leave the handset in the base charger. Otherwise it would not complete.
SOURCE: Unable to update firmware
Your router latest Firmware I can see on D-link website is 1.02
If you are referring to German web site page showing a dwl-g700ap_fw_revB_v213b06.zip file be sure to follow the instruction to UNZIP the web_dwlg700ap_v200_r11_0408.bin file:
DWL-G700ap Firmware Update
- Browser starten
- Konfiguration des DWL-700ap aufrufen (Standard IP 192.168.0.50)
- oben auf Tools
- links auf Firmware
- auf den Knopf Durchsuchen klicken
- die Firmware Datei (web_dwlg700ap_v200_r11_0408.bin) auswählen
- auf Apply klicken
Wenn die Firmware installiert und der DWL-700ap dann neu gestartet ist klicken Sie oben auf Tools/System/Restore to Factory Default.
Danach ist die Firmware übernommen.
If you did not unzip the bin file router cannot run it as firmware update
More over be sure to run the update via LAN cable connection (no WLAN)
You can get the latest bios from the link below
http://www.foxconnchannel.com/EN-US/support/downloads.aspx?ProductModel=600A01-6LRS&TypeID=en-us0000003
Hope that helps,
Sai.
SOURCE: Unable to update firmware on sansa clip+
Hello,
Next link refers to the Sansa Firmware Updater, you tried to use for
updating:
http://kb.sandisk.com/app/answers/detail/a_id/300/kw/update/r_id/101834
The updater download link:
http://mp3support.sandisk.com/sansa/Application/SansaUpdaterInstall.exe
NOTE: Administrative access is needed on your PC to run the Sansa Firmware Updater
NOT supported:
MAC & Linux
When running MAC or Linux instead of a Windows based computer, the updater will not work.
Checking the answers page for information support, see the page:
http://kb.sandisk.com/app/answers/detail/a_id/4303/kw/update/p/555%2C1727/r_id/101834
Sandisk comes with next results:
For the Sansa Clip there are updates available:
- Clip Firmware Update (latest version 01.01.32 & 02.01.32)
Sandisk Forums page:
http://forums.sandisk.com/sansa/board/message?board.id=clip&thread.id=15109
For the Sansa Clip+ there are no updates:
- Clip+ Firmware Update (not available yet)
Sansa Clip+ user manual:
http://mp3support.sandisk.com/downloads/um/clip+-en-um.pdf
SOURCE: downloaded latest firmware update but will not pla...
latest 2,3 on my bluray,,bdp 1400, samsung,, still showing menus at chapters on several discs,,inc avatar..this will stop me buying new discs, till they sort out upgrades,,may be a 6 months wait,, but worthit to avoid this ****,hassle and hair loss.
279 views
Usually answered in minutes!
×