Why my brother Dcp 1510 printer busy - Brother Office Equipment & Supplies

If your Brother DCP-1510 printer is in sleep and stack copies mode, you will need to wake it up in order to print your document. To do this, simply press the power button on the printer and it should wake up. Once the printer is awake, you will be able to print your document.

Hi, To fix this problem, Power off the printer from the main power source and turn back it on after a minute. If printer shows ready, printer is Good. If it does not fix contact brother printer support.

please check the model #, there is no dcp-1510

-How long you have this printer ?. If it's been used to print a lot then possibly the imaging drum is out (effect). You possibly can buy a replacement drum.
-But for me I better buy a new printer at the same cost of a drum.

Good luck

Mai

Check the obvious drum and toner ok, paper supply ok, paper not jammed in fuser.
then check out the attached link

then buy a new machine, keep the drum and toner cartridge from the old one as spares.

brother dpc 1510 printer showing on print unable 0B. how to clear?

This usually a mechanical problem in the printer if shutdown or restart doesn't work you need to take contact brother
Print Unable or Print Unable XX Brother

Manuals DCP 1510 Australia Brother

User Guide Manuals DCP 1510 Australia Brother