Speed Queen top loader do not take water atthe start of the cycle. We add water by hand and then go through whole cycle even take water in rince cycle.

I hope that you ordered the correct part, Also there is an idler pulley that maintains the belt tension and that needs to be checked for proper tension.

water level switch

speed queen double front load washer spinning without stop,please give some idea,thanks alot

make sure unit is level possibly lower front legs down so front sits higher,,, and also when u put or load in push the tub back so when the water enters it all enters into the tub sometimes the water will splash on the tube and cause a problem u are discribing hope this help

check hoses and pump area.

Check the belt and idler pully
The pully shoud turn freely

Have you removed the front panel?

If not remove front panel two screws 5/16 on bottom

Start the washer in a cycle. look with a flash lite and look for leak.

It maybe the rubber boot.

Please let me know if you have any other questions.

I will also need model number, because a AWS52NW is a top loader model number not a front loader.

T

Check your lid switch, some machines stay running when you add clothes when it agitates, but will shut off if you lift the lid in rinse and spin, lid switch may be broken.

You probably have the wrong belt, and its to small? Go to repairclinic.com or google Kelvinator parts. Order the correct belt.