How do I turn on the message waiting light option?

for sending text messages :
1.go to your message settings and check the message center number to see if it is correct
2. call to your network operator customer care
3. request the message center number...
4.note it down
5. go to message settings>message center number
6. insert the number which is noted by you and save it

this solves your messaging problem ...
Good luck

check this :
Message "Missing PDFMaker files" when you right-click a file to ...

here is a download for the manual on page 12 and 13 in English.
http://customer.honeywell.com/techlit/pdf/PackedLit/69-2380ES.pdf

Press the up and down button simultaneously from a few second till display changes and then on #1 set it to option 1 and that show be C.

REMOTE ACCESS

This section explains the remote access process for use with any touchtone

phone.

1. Dial the phone number for the answering machine.

2. After the answering system answers, press any numbered key on the

touch-tone pad to bypass the outgoing announcement, or wait until

the announcement finishes.

3. Enter the security code after you hear the tone.

4. Follow the voice menu to use the answering machine's remote functions.

The remote feature enables you to perform the following functions:

To Press this button

Review message 1

Play back messages 2

Stop message play back 2

Erase message 0

(during message playback)

Skip message 3

Turn off/on answerer 4

Review voice menu options 7
No valid dialing tones for 15 seconds will hang up the telephone line.

You can get the manual on the link below if you need page 31.

http://www.home-electronics.net/USER-GUIDES/26976_DOM_ES_CL_IB.pdf

Good luck

try to reset your printer--
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print 
2 times Green EEPROM print 
3 times Orange EEPROM reset
4 times Green Waste ink counter reset 

5) Turn off the printer.( it must be turn off)
then turn it on again. this works. thanks.

Slide the Nortel Grey Bar above the Hold & Rls buttons to reveal the setup button.

1. Hit that button to show *Options List / # Setup list
2. Press * to go into options.
3. Use the arrow buttons or hit 3 to go into CLEAR MESSAGE WAITING
4. Then hit 3 again to clear the message waiting

This should resolve the blinking light.

The menu items on my 2600 have changed to email (1) messaging (2) recent calls (3) media net (4) media mall (5), etc....I cannot find the alarm features, not even in the games & applications menu item. What probably happened? How do I get my 2600 to give me the standard menu item

Do you have the receipt for the machine? You have a 1 year warranty from Xerox on that machine, Here is the copy and paste from the warranty information on the Xerox website.

Xerox warrants that the Phaser 3200MFP product and its Consumables, Routine Maintenance Items, and Options/Upgrades (related items) will be free from defects in materials and workmanship for the periods set out below:
Product: a period of one (1) year from the date of shipment.

Word Help var strShow = 'Show'; var strHide = 'Hide'; var strRtl = ''; .ACICollapsed { display: none; } .ACECollapsed { display: none; } .ACICollapsed { display: inline; } .ACECollapsed { display: block; } function go(url) { window.open(AppendFromParamToUrl(url), "_self"); } function OpenInNewWindow(url) { window.open(AppendFromParamToUrl(url), "_blank"); } function AppendFromParamToUrl(url) { if (null != url) { url += (url.indexOf("?") > -1) ? "&from=" : "?from="; url += escape(window.location.href); } return url; } var L_UNDEFINED_TEXT = 'Help could not locate this inline definition.'; function InlineDefNotFound() { alert(L_UNDEFINED_TEXT); } function AppendPopup(oSource, sPopup) { InitializeGlobalData(); if (typeof(allDivsInPage) == 'undefined' || null == allDivsInPage) return; var theDiv = allDivsInPage['divInlineDef_' + sPopup]; if (typeof(theDiv) == 'undefined' || null == theDiv) { InlineDefNotFound(); return; } if (theDiv.style.display.toUpperCase() != 'INLINE') theDiv.style.display = 'inline'; else theDiv.style.display = 'none'; } var strAssetVersion = '0';var strGoDisplayCountOK = "Remaining characters: {0}";var fDisableCounter = false;var fDisableCounterFirst = true;var fWasLastCountOver = false;var fIsSimpleFeedbackWiz = false;var fIsOn2Lines = false;var strGoDisplayCountOver = 'You entered {0} characters. Please enter {1} or fewer characters.';var strGoDisplayCountOverStar = '* ';var strErrorCommentTooLong = 'The text you entered is too long. Please do not type more than 650 characters.';var iFeedbackWizStarRated = 0;var iRvasap = 0;var fFeedbackWizJustRated = false;var strYouAreNotOnlineErrMsg = 'You are not online.';var strPageAssetId = 'HA101746461033';var strFeedbackPageUrl = 'http://office.microsoft.com/assistance/fbk.aspx';var strPageLoggingParams = 'CTT=98&Origin=HA101746461033';var strCommentOnThisTemplateLnk = 'http://office.microsoft.com/en-us/suggestions.aspx?AssetID=HA101746461033&Type=0&Rating=0';var strCannotSubmitFeedbackErrmsg = 'Your feedback could not be submitted.';var rgStrClickToRate = new Array(5);rgStrClickToRate[0] = 'Click to rate: 1 out of 5 stars';rgStrClickToRate[1] = 'Click to rate: 2 out of 5 stars';rgStrClickToRate[2] = 'Click to rate: 3 out of 5 stars';rgStrClickToRate[3] = 'Click to rate: 4 out of 5 stars';rgStrClickToRate[4] = 'Click to rate: 5 out of 5 stars';var rgStrYouRated = new Array(5);rgStrYouRated[0] = 'You rated: 1 out of 5 stars';rgStrYouRated[1] = 'You rated: 2 out of 5 stars';rgStrYouRated[2] = 'You rated: 3 out of 5 stars';rgStrYouRated[3] = 'You rated: 4 out of 5 stars';rgStrYouRated[4] = 'You rated: 5 out of 5 stars'; Where is the AutoFormat feature? The AutoFormat feature, which was part of Microsoft Office 2003, is not included in the 2007 Microsoft Office system.
There are two ways to use the capabilities of the AutoFormat feature:

• You can use other features in Microsoft Office Word and Microsoft Office Outlook. The AutoFormat As You Type tab includes the most useful capabilities of the AutoFormat feature. For more information, see Use automatic formatting as you type.
• In Word, you can add the AutoFormat command to the Quick Access Toolbar.

Add the AutoFormat command to the Quick Access Toolbar in Word If you want to use the AutoFormat feature in Word, you can add the command to the Quick Access Toolbar.
Note You cannot restore the AutoFormat feature in Outlook.

1. Click the Microsoft Office Button , and then click Word Options.
2. Click Customize.
3. In the Word Options dialog box, in the Choose commands from list , click All Commands.
4. In the list of commands in the selected category, click AutoFormat, and then click Add. Note Optionally, you can also add the AutoFormat Now command.
   

Service mode operation procedures>
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The LED lights
in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the
Resume/Cancel button is pressed, The LED lights alternately in orange and green, starting with orange.)
4) When The LED lights in green, press the Resume/Cancel button the specified number of time(s) according To the function listed in the table below. (Each time
the Resume/Cancel button is pressed, The LED lights alternately in orange and green, starting with orange.)
5) After the function (menu) is selected, press the Power button. The LED lights in green, and the selected function is performed. (When the operation
completes, the printer returns To the menu selection mode automatically.)
<Destination settings procedures>
in the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the destination listed in the table below, and press
the Power button.
Note: After setting the destination, confirm the model name in service test print or EEPROM information print.
[See 3.4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
To the top
Time(s)
LED
Function
Remarks
0 times
Green
Power off
When the print head is not installed, the carriage returns and
locks in the home position.
1 time
Orange
Service test print
See 3-4. Verification Items, (1) Service test print.
2 times
Green
EEPROM information print
See 3-4. Verification Items, (2) EEPROM information print.
3 times
Orange
EEPROM initialization
4 times
Green
Waste ink counter resetting
5 times
Orange
Destination settings
Proceed To the step 5), and follow the destination settings
procedures.

Destination
1 time
Orange
Japan: iP8600
2 times
Green
Other than Japan, non-support of CD-R printing (A4): iP8500
3 times