Lost the cd to my d-link 2310

Use the On-Line setup. User setup manual: http://www.netwood.net/support/manuals/D-Link_WBR2310_manual_10.pdf

You can download the setup files from here:
http://www.dlink.com/products/?tab=3&pid=EBR-2310&rev=EBR-2310
t.

If you only have a modem, you need to get a router.
If you have a router:
You do not need a cd to install on your desktop. I assume that you have a wireless adapter in your desktop, right?
all you have to do is click on the wireless icon in the tray, select "view available networks" then select your network and type in your security key if you have one setup.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

If the CD is not working properly you can get the drivers here: http://www.dlink.com/products/?pid=WBR-2310. Select support resources and choose your revision. On the next page choose "additional downloads" and then "quick router setup." Download and install.

You do not need to install any software in order for a router to opperate.

Check your physical connection first. From the modem, it should be connected to the router's Internet port, then your computer must be connected to port 1 on the back of the router. Then do a power cycle, no need to run the setup CD. If it doesn't work, you need to manually configure the router. You may need assistance from D-Link tech support. Call their toll free number

Dont use the CD setup. Call your equipment manufaturer of your router for manual configuration on your mbr-2310.

Yes, you can connect the DI-624 to your exitsing EBR-2310, you just need to connect the a cable from port 4 of the EBR-2310 to the internet/wan port of the DI-624, then after that you can already use now the wireless to your laptop and also the wired router to your desktops.
But I may suggest you to just replace the EBR-2310 with the DI-624 so you will only be using 1 router that can cater your laptop and also your desktop, Just connect the cable from your modem that is conencted now to your EBR-2310 to the internet/wan port of the DI-624 then run the setup CD that should be it.

Hope that helps...........

can someone help me? I lost my CD installation too...

Hello, Go to dlink.com and do a search for you model number. You should be able to find the software and download free. Hope this helps..