Honeywell safe
Just clean the metal parts inside the battery compartment with some isopropyl alcohol and try to scratch off the brown corrosion with sandpaper.
NEED HELP WITH YOUR DIGITAL LOCK?
Most digital lock problems are related to low, dead or Non-Alkaline batteries. For all SentrySafe models, we recommend the following:
FOR SENTRYSAFE MODELS THAT BEGIN WITH A3, A4, A5; J3, J4, J5; S0, S3, S4, S5, S6, S7, S8, SB, SBW, SC, SW; J3, J4, J5; L0, L3; V:
Don't know your model number? Find it here.
Slide open battery cover below keypad.
FOR SENTRYSAFE MODELS THAT BEGIN WITH CS, CSW, DA, DS, KS, KSW, MS, MSW, OA, OS:
Don't know your model number? Find it here.
Turn electronic lock clockwise.
FOR SENTRYSAFE MODELS THAT BEGIN WITH SFW082B, E, F, G; SFW123B, E, F, G; SFW205B, E, F, G; STW123G; STW205G:
Don't know your model number? Find it here.
Pull out the battery drawer.
FOR SENTRYSAFE MODELS THAT BEGIN WITH SFW123T, U; SFW205T, U:
Don't know your model number? Find it here.
This safe has a Battery Auxiliary Override-
Remove battery compartment from inside of safe door.Enter 5-digit code and turn handle to open.
FOR SENTRYSAFE SECURITY MODELS THAT BEGIN WITH ESB; PL:
Don't know your model number? Find it here.
Remove battery compartment from inside lid of door.
FOR SENTRYSAFE SECURITY MODELS THAT BEGIN WITH QAP1E, QAPBE1, QAP2E, QAP2EL:
Don't know your model number? Find it here.
Pull out battery pack.
FOR SENTRYSAFE SECURITY MODELS THAT BEGIN WITH CA; HL:
Don't know your model number? Find it here.
Override key lock cap.
FOR SENTRYSAFE MODELS THAT BEGIN WITH X:
Don't know your model number? Find it here.
Remove battery compartment cover.
FOR SENTRYSAFE SECURITY MODELS THAT BEGIN WITH T:
Don't know your model number? Find it here.
Turn electronic lock clockwise and remove. Slide key hook plate back into place.
FOR SENTRYSAFE SECURITY MODELS THAT BEGIN WITH DH:
Don't know your model number? Find it here.
Turn electronic lock clockwise and pull away from mounting plate.
Wrong site notify locksmith
SOURCE: small floor safe Sentry Model 3877 electronic lock and key
This manual will answer both of your questions.
http://www.sentrysafe.com/pdfs/OwnersManuals/501664.pdf
SOURCE: Have a honeywell security box
This means you need to change the battery use your key to open it up the battery compartment is under the top of the box with a slide off cover
SOURCE: gordon item#45891 digital safe, lost code the door is open
there is red button on the inside of the door (hinge side) press this , then key in a new code
SOURCE: Door locked on safe
Brian We can't give advise on the safe but you can call the manufacture of the safe and if you have registered it they will help you otherwise federal law requires a lock smith to identify you and your information and your ownership of the safe before they will unlock it for you. This is to protect you or the safe owner and the lock smith from being sued and losing his licence.. There should be a sticker on the safe with a 800 number for you to call to get help. But you must have registered it first. They may have a way to verify it some other way but am not sure.
SOURCE: CAN NOT OPEN MY SAFE,
To retrieve your lost sentry fireproof safe combination. First, find your safe's Model and Serial Number. The Serial Number is printed on the small label on the right side of safe (on paper tag near hinge) or under handle. As this information is confidential a valid credit card and email is needed to verify a customers name and address
sentry safe combination archives searches. Do come with a service charge although it's definitely cheaper then buying a new home electronic sentry fireproof safe.
A good locksmith should be able to help you with the dialing programming instructions and lost Sentry Safe Key Replacements
511 views
Usually answered in minutes!
×