Cameras Logo

Related Topics:

Beth Thomas
Beth Thomas Posted on Oct 08, 2018
Be the first to answer

Sony handicam menu button not working

When I press it it doesn't move the cursor justgoes to shooting mode and backagain

Answer This Question

5 Related Answers

Anonymous

  • 169 Answers
  • Posted on Aug 26, 2007

SOURCE: Canon Rebel will not shoot in AF mode

the mirror is problem of your camera,it alway been close that why the sensor is functioning properly cause that sensor is working in af mode....check the post at the side of the mirror if not broken and the spring of the mirror if not dislocated....doing this you should removed the lens from the body......

Ad

Anonymous

  • 1 Answer
  • Posted on Jul 17, 2008

SOURCE: some of the buttons don't work

Hi,
I just had the exact same problem with my TZ1. I sent it to DK Audio Visual Services in UK. They opened it and cleaned the Circuit Board. Now everything works fine. The damage? 75£ or something lie 150$ That is not so bad considering that the new TZ5 is sold at 400$ and more...

Cheers.

Dominic Lemoine

Anonymous

  • 1 Answer
  • Posted on Feb 15, 2009

SOURCE: How to turn off burn-in mode if botton on Monitor

I didn't have the monitor connected to the computer, and that's why the power button was unresponsive. After connecting it, the solution above worked for me.(My KVM switch was set to a computer that was turned off)

Anonymous

  • 3 Answers
  • Posted on Apr 12, 2009

SOURCE: one of the buttons on the monitor doesn"t work

To solve an OSD lockout problem just follow one of the four fixes on this page:

http://www.thefakegeek.com/2009/04/how-to-unlock-an-osd-lockout-problem/

CliCker Pro

Mirlind Sylejmani

  • 64 Answers
  • Posted on Nov 21, 2009

SOURCE: the left mouse button on my laptop isn't working

Go To Start-> Settings-> Control Panel-> Mouse - Check All Options Are As U Wish Then Try Unplugging It Restart Pc It Should Work...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I reset the time on my camera? Olympus C-500 Zoom
Set the mode dial to P and turn the camera on. Press the OK button to bring up the menu. Press cursor-right to select the MODE MENU. Use cursor-up/down to select SETUP and press cursor-right. Use cursor-up/down to select the clock icon and press cursor-right. Use cursor-up/down to select the format and press cursor-right. Use cursor-left/right to move between the fields, cursor-up/down to change their values. Pres OK when done.


The above is from pages 29-30 of the reference manual. If you need manuals for the C-5000, you may download PDF versions and/or order printed manualsfrom here.
Read full answer
Jun 20, 2012 • Cameras
tip

Service menu codes hitachi
I provide this information for those that are qualified and trained to do TV repair work. Entering or making changes in service mode by untrained persons can cause significant and permanent damage to your television. If you are not qualified to service your television, please DO NOT ENTER these service menu codes.

RPTVs :


F59 SERIES

* Press and hold the {MENU} button on the TV.
* Then press the {MENU} {8} {SELECT} buttons on the remote.
* To exit, press the {MENU} button on the TV or
the {EXIT} button on the remote control.

DCAM Mode:

* Using the remote control:
* Hold down the {TV} button.
* Press the {MENU} button.
* Press the {INFO} button.
* Release the {TV} button.
* Remote Control Key Functions When In DCAM Mode:

{INPUT} ............. Blue (13x9 adjust)
{ASPECT} ............ ROM Write
{DAY/NIGHT} ......... ROM Read
{MENU} .............. Remove Color
{EXIT} .............. Cross Hatch/Video Mode
{INFO} .............. Green
{GUIDE} ............. Calculation
{2} ................. Cursor UP
{5} ................. Cursor DOWN
{6} ................. Cursor RIGHT
{4} ................. Cursor LEFT
{0} ................. RED (7x5 Adjust)
{STOP} .............. Initialize
{PLAY} .............. Raster Position
{FAST FORWARD} ...... Phase

To Exit The DCAM Mode:

* Press and hold the {TV} button.
* Press the {0} button.
* Press the {1} button.
* Release the {TV} button.
Read full tip
on Apr 29, 2015 • Hitachi Televison & Video
0helpful
1answer

D7000 in p/s/a/m all in b/w mode cannot find how to put back to colour
Your Picture Control is set to Monochrome.
To change the Picture Control, press the MENU button Select "Set Picture Control" from the Shooting menu, press cursor-right, use cursor-up/down to select the desired Picture Control, then press the OK button.
Full details are in the "Picture Controls" section of the manual (page 131 in my copy).
Read full answer
Feb 28, 2012 • Nikon D7000 Digital Camera
0helpful
1answer

Change date on camera
In any mode, press the Menu button. Use cursor-up/down to highlight Setup, then press the OK button. Use cursor-up/down to select Date&Time and press OK. Use cursor-left/right to move between fields, cursor-up/down to change them. Press OK when done.
Read full answer
May 19, 2011 • Kodak EasyShare Z710 Digital Camera
0helpful
1answer

How can I snap A black & white still picture by finepix S8100fd Please help me...
Press the F button to bring up the F-mode menu. Use cursor-up/down to select "Color" then press cursor-right. Use cursor-up/down to select "B&W" and press MENU/OK. It's all in the "Using [F-MODE MENU] (Photography) [SHOOTING MENU]" section in the manual (page 73 in my copy).

In general you're better off shooting in color and doing the B&W conversion in a photo editing program on a computer. If you let the camera do it, it's going to do it its own way. On a computer, you have complete control over brightness, luminosity, contrast, and other factors. You can also simulate filter effects. And if you happen to take that once-in-a-lifetime picture, you can't convert from black&white to color.
Read full answer
Apr 27, 2011 • Fuji FinePix S8100fd Digital Camera
1helpful
1answer

How do i shoot in Sepia
The menus and terminology vary a bit between makes of camera but this example is for the popular Panasonic range of Lumix cameras:-
1. Switch the camera to Manual Mode -
2. Press the Menu button -
3. Navigate with the 'go up' or 'go down' buttons to 'Col.Effect' -
4. Use the 'go right' button to move the cursor right -
5. A list appears with 'Sepia' as one of the options -
6. Use the 'go down' button to move the setting down to 'Sepia' -
7. Click the central 'Set' button once to select the 'Sepia' setting and return to the 'Menu' -
8. Press 'Set' button again to exit from Menu and start snapping in Sepia!!
Read full answer
Dec 11, 2010 • Cameras
0helpful
2answers

How do i get black and white on my camera? how can i make it so i can set a time to take a picture, like for example a picture of myself. How do i set the timer so i can get about 2 feet away from the...
Sounds like you want to do a lot of things with your camera but don't have the manual. You can download one at the support section of the Pentax website.
Read full answer
Dec 01, 2010 • Pentax K100D Digital Camera
0helpful
2answers

I have a Philips 51PW9303 Rear Projection TV that had blue shadows around the sides of the screen and now has a green and red bowed line at bottom. Does I need a convergence board to solve this?
If the following doesn't work the tubes could be at the end of life:
Adjusting convergence:
Note: For best results, the Projection TV needs to be turned on for 15 minutes or longer before adjusting the picture tubes (convergence).

To adjust the convergence of the picture tubes:
  1. Press the 'MENU/SELECT' button on the remote.
  2. Press CURSOR RIGHT to enter the PICTURE menu.
  3. Use CURSOR DOWN and RIGHT to select and enter MANUAL CONVERGE.
  4. Press CURSOR RIGHT to select CONVERGE RED or press CURSOR RIGHT and DOWN to select CONVERGE BLUE.
  5. A crosshair will be shown on the screen. If there is any red or blue fringe around the crosshair, use CURSOR RIGHT, LEFT, UP, DOWN to try and merge the fringe colors with the crosshair.
  6. Press the 'MENU/SELECT' button to return to MANUAL CONVERGE menu.
  7. Press the 'EXIT' button to exit the menu.
If you are satisfied with the convergence you may stop now. Otherwise, you can continue and adjust the convergence more using mult ipoint convergence.
To Adjust multipoint convergence:
  1. Press the 'MENU/SELECT' button on the remote.
  2. Use CURSOR RIGHT to enter the PICTURE menu.
  3. Use CURSOR DOWN and RIGHT on the cursor ring to select and enter MANUAL CONVERGE.
  4. Press CURSOR RIGHT and DOWN on the cursor ring to select MULTIPOINT RED or MULTIPOINT BLUE.
  5. A grid of crosshairs will appear on the screen. If there is any red or blue fringe around any of them, press CURSOR RIGHT to enter NAVIGATE mode.
  6. Use CURSOR RIGHT, LEFT, UP, and DOWN to move to a crosshair that has a color outline.
  7. Press the 'EXIT' button to enter ADJUST mode.
  8. Use CURSOR RIGHT, LEFT, UP, and DOWN to merge the color with the crosshair.
  9. Press the 'STATUS/EXIT' button to return to NAVIGATE mode. Repeat as necessary.
  10. Press the 'MENU' button to return to the MANUAL CONVERGE menu.
  11. Press CURSOR DOWN until SAVE MULTIPOINT is selected.
  12. Press CURSOR RIGHT to save the multipoint settings.
  13. Press the 'EXIT' button to exit the menu.
Read full answer
Apr 03, 2010 • Philips 51PW9303 51" Rear Projection...
0helpful
2answers

I have a Philips 46PP9302 and can't find the Quick Setup guide. I'm wondering if it is located on-line. We moved our tv and want to recalibrate it.
http://www.retrevo.com/support/Philips-46PP9302H-TVs-manual/id/278ci462/t/2/

The above link should take you to the location where you can view all the parts of your models manual. Select the area of interest and rad onlinje


Please rate my help++++Thanks for using FIXYA
Read full answer
Nov 24, 2009 • Philips 46PP9302 46" Rear Projection...
50helpful
2answers

How to remove "in retail store mode with settings" message
Question What should I do if my TV is stuck in Retail mode? Answer Your TV may have been set to Retail Store mode, which is mainly used on the shop floor.
For home use, we recommend that you set the TV to HOME mode, which will allow you to change the settings.
To change to HOME mode follow the steps below.
  1. Press the 'MENU' button on the remote control to access the main menu.
  2. Move the cursor down to select INSTALLATION and move the cursor right.
  3. Move the cursor down to select PREFERENCES and move the cursor right.
  4. Select LOCATION and move the cursor right.
  5. Move the cursor up/down to select HOME and press the 'OK' button for confirmation.
  6. Press the 'MENU' button to exit the menu.
Read full answer
Sep 29, 2009 • Philips 42PFP5332D 42 in. Plasma...
Not finding what you are looking for?

View Most Popular

Cameras

Related Question

How do I reset the time on my camera? Olympus C-500 Zoom

  • Cameras

156 views

Ask a Question

Usually answered in minutes!

Popular Questions

My digital Sony camera fell down Lens got stuck

Sony Cyber-Shot DSC-P72 Digital...

Sony DSC-W80 message for use with compatible battery only

Sony Cyber-shot DSC-W80 Digital...

Turn the power off and on again displayed

Sony Cyber-Shot DSC-T3 Digital...

Sony DSC-W50 Flash Error code-E:91:01

Sony Cyber-shot DSC-W50 Digital...

Sony CyberShot DSC-W30 Access Error

Sony Cyber-shot DSC-W30 Digital...

Top Sony Cameras Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Dsc-hx50.pdf. user-manual-DSC-HX50V...

Sony DSC-HX50V...

PDF Manual
Dsc-t10_adjustment_ver-1.1.pdf....

Sony Cyber-shot ...

PDF Manual
DSCT70_handbook.pdf....

Sony Cyber-shot...

Loading...